sja ✭✭✭✭✭

‌hi youtube is your friend https://m.youtube.com/watch?v=JIvXXX2wWaY https://m.youtube.com/playlist?list=PLSAG2TJPvS5aj8CWVFwnSDmjZZI9D2vru

Hi you can use NETFLOW and SNMP to do that. I think SNMP because its lightweight compare to Netflow.

Hi Please try that http://www.solarwinds.com/documentation/Orion/docs/OrionPerformance.pdf If your network is very big with multi pollers try that Building a Large-scale SolarWinds Installation - YouTube Hope its helps

Hi Nigel Run into the same problem just on juniper router config. Did you found what you looking for ?

Hi It's something in your setup and not NCM. I have many Junos/SRX that use the standart template from NCM. Did you create a global profile (User name/password) for that SRX? /SJA

Hi polux2019​ I think you could just use netpath to get tcp/22 status that is part of Orion /NPM NetPath - Easy Visual Network Path Analysis | SolarWinds

Like that Where NPM_RoutingNeighbor_V.LastChange>Dateadd(MINUTE,-200, Sysdatetime()) AND ProtocolStatus<>6 Nops...

Nice Can it display the alerts and events? /Sja

‌Hi David try to get what you have ..from alcatel Gpon very unfriendly mib support..

Take a look at that You Can have many different commands in the same template just not not in the line... Juniper Devices-1.3.6.1.4.1.2636 with show chassis hardware

Hi rwagner​ That ex2300 probably is not using those Oids Run a ticket with juniper with snmp walks of those Oids NPM support. Juniper is quite stable about those Oids across the mx and ex series... Success Center

hi Try this 2 links. Building a Large-scale SolarWinds Installation - YouTube https://www.youtube.com/watch?v=KgzvfVPlf8M

Hi Juniper support net flow v5 v9 and Ipfix what type of flow is it?

I found that very very educational https://www.youtube.com/watch?v=-N9i-YXoQBE

Hi Take a look at those 2 links That how you scale Orion... Syslog and Trap Messages are Slowing Down my Monitoring Solution. What Would the Geek Do? - YouTube Building a large scale SWI installation - YouTube

NOT yet... please vote this is probably the biggest issue with NCM.

designerfx​ Please go back to the drawing board rschroeder​ is absolutely right. It’s not the right tool for the job SolarWinds Lab #66 - Using the Right Tool for the Job or just take adatole​ way “damme wrong“

Hi Juniper has red/yellow alert try to see if you can get those interface uplink status to red yellow That will indicate to your noc at there is a problem Understanding Alarms - Technical Documentation - Support - Juniper Networks

Hi ucschassis​ I don't see why it's should not work ...I think support ticket will be the right way.

I know its in the "list" But the list is other way to say go away... case 54708 Is there someone that could say YES its will work in 10.3/4 the next 6 mouth?something with no maybe in it...

Hi Dean This 1 is working just fine for me but you need NCM There are some CP that from my net (POP,owner,node_type)

Hi jvanderbeken​ Sound like you work for ISP I have some Nokia : SAR you can get NPM/NCM to work regarding SNMP interface mib2 and NCM Backup. You will need to use some UnDP for PSU/FAN.. (not OOB) or use traps Juniper MX has "ok" support need that UnDP (red &yellow) to get more from the OOB jnxRedAlarmState (OID:…

‌hi kevin its "well know problem " please vote

‌Hi The answer is Yes. I monitor Harmonic & Aurora EDFA RF power. Its more about what the vendor mib support them what type . We use a poller like that to alert on isues with RF power input

Ohh Found it thread from 2010 SNMP forwarding any one know other standalone that can do that.?

I will use the reports to collect and compare software versions.

Hi I running to problemes with Juniper LAG interfaces & backhaul interface (just 1 interface to ISP or "cloud") It's notice on the RC of NPM 10.7 its not fix on the GR. It's good for me that cisco has the same problem because my juniper is less important :-) /SJA

I just hope someone from the famous "UX Team" will do something about color scheme from NPM12

I think its more "matter of will" den Mibs2 support Its sure work for the EX3200 in the solarwind demo

‌hi I think it's will be much more easy to help you out if give more information about your network environmen. I have a 10000+ elements 2000 nodes 8000 intefaces 3 polling engine on NPM 11.1 NCM 7.3 NO Problems if you keep your eyes on the system look on that video it will help you understand how to scale the system.…