sja ✭✭✭✭✭

Work around that could be enabled syslog for system message (if it’s possible with that Cisco ;-)) and triggering syslog alert on match value .. If that Cisco is not support that you could run NCM job that will collect the “show output “ to file and then use Other tool to look into the file. that feature request will make…

Hi Not a Cisco shop until now we use alot of Juniper Those 11 ASR 9001 and 9006 "behave quite normally" They run "Cisco IOS XR Software 4.3.1" and "Cisco IOS XR Version 4.3.4" Funny that before we got those ASR9K I was sure that "everything" is working 100% when you monitor cisco in NPM.

Hi Kstone and Bkyle Thanks for getting back to me No scripts enable right now I have 2 server Server 1 on kiwi 9.4.2 around 42K per hours traps only no memory leak (has stop when move back to 9.4.2) Server 2 on kiwi 9.5 around 14K per hours traps and syslog memory leak ( take around 12 -24 hours service reach 2 meg) I do…

Yes I do... I quite sure that the interface has active alert from the old description that wasn’t cleared maybe just acknowledge so whenever NPM got a change status the old description was there..no resolve of the description made... I just wondering about that

Hi Tony I upgrate NCM to 7.4 probably because of that thread... so thanks one more for sharing that NPM/NCM report. Did you try to join customs property table into that report? Could be very nice if it will work... Try to get it to work... POP-NODE-INTERFACE-STATUS in my report SELECT…

Hi Netpath is a good for visual path to aservice that running on TCP only .. Netpath agent is a windows only ... Those 2 things (no UDP /open agent) make it much less attractive for me... Cisco shop will utilize Netpath with IPSLA. Juniper shop RPM + what ever we can get... The next generaion is that Network telemetry and…

Cool thanks Not easy to get that from the portal ...

Sure will try that Rob. Is there any any materiel on that new feature? I enable that on my RC but the link to the materiel is dead. /SJA

I will go for the 10.1.3 /SJA

Thanks for the update Hope for some good news... /SJA

‌Hi well that's the first time I see RC for service release ...but we had a lot of change in that 11.5 best of luck we really like to hear some positive vibes

Thanks

Sure like to know why I can't move from 11.5.3 to 12.1 in 1 jump But I can Jump from SAM 6.1 to 6.3 ? :-)

I dont have any "baseline " but I sure have alot of nodes backup some are "running" some are not.. Does it need to run baseline over all type backup ? For exspl. Have have speciel backups that look for HW change ...is that will baseline ? That will take some time ...

So the NOC isn't on your back anymore? I need to move to 12.1 NPM/NCM setup Really don't need the NOC on my back if it's 5 hours service that included calling Solarwinds support..

Nice to know I need good news about that release.. by the way how many pollers do you have in that setup? /sja

Hi Richard Did you upgrate from 12.0 or from 11.5.3? /SJA

lynchnigel mmm 12.1 it's not more den 10 days ... ​

same her on NPM 11.1 1.3 GB crash file in the same location. The Topology is on ONLY 8 core Juniper routers " so it's scale quite good?" /SJA

Is that "retro problem" ? when that will replace the MSMQ * 5671 (TCP) for Rabbit MQ messaging

well +3 years and where is that feature? /sja

Hi Mav Thanks for getting back :-) I will try to refine my question. I trying to get "a realistisk maximum number" How much is too much? Is that the MS SQL or TCP stack or Disk IO .. I thing I could get that from real life deployment ...

Yes i do for groups...every POP has a unique name that i used to that... I will like to scan that use the same dynamic group members ...

‌hi This question is about the software design of 2015 core. any changes to 64 bit?

The problem is that ... I don't see the new OOB poller in the "mange pollers" ... I dont know if it's problem with my setup er SW didnt made control to that poller from "mange pollers" /SJA

Hi rschroeder​ Rick You allways there for helping!! I talk about the new out of the box poller that came with 12.3 I don't have any planes to ListResources for 100 + APC UPS...

I will like if you don’t use API something like that frameworks for running tasks .. For example: run an disco on that group of elements with CP “my access” I like only interfaces that start with “ge” and I will have that CP to those new interfaces.. But I sure like to talk about map discovery engine to work in a real…

‌hi that what i try to avoid.... its its look like that 11.5.2 + all the HotFix is now stable. 11.6 will have new features that can/will introduce new bugs. I Like to use the the new alert engine from 11.5 without the the new UI. I need that "clean sheet" the he road to this stable release was too bumpy...

Hi Is 4+6 magic number for that SR ? Network Performance Monitor v11.5.2-Hot Fix 4 Orion Platform v2015.1.2-Hot Fix 6 Please ?

‌hi Kate I know that solarwinds can make hotfix to Orion core or NPM faster than SR. I just don't want to update setup that has 5-6 server to the 11.5.2 of NPM and 7.4 NCM and 6.2.2 SAM with APE&AWS .... than HotFix all the setup. My environment is a 24/7 NOC that use only that setup for alerting/monitoring. I Just can't…