shawn_b

I got an e-mail for assistance on creating this, so I have provided some guidance as follows: 1. Select a screen where you want this content displayed. Home > Summary is a good place to start 2. Expand the left navigation bar and Add a new tab 3. Name the Tab, select Tab icon and determine column width 4. Add a resource.…

I see this as already answered, this may also be of some value to you. if you know the capacity of your connection in bps, you can chart the interface avg bps, which will allow you to se the bandwidth usage over a period of time. I have a 10Mbps connection between sites. I measure the bandwidth used in an interface avg bps…

There is a built-in alert named "Alert me when a group goes into warning or critical state" "This alert will write to the event log when a group goes into warning or critical state and when a group comes back up again." This alert will trigger when a group member goes down (group is still up) or all the members in the…

cherry01 I am heading down this path soon. Did you get this to work? any assistance you may have would be welcomed

trading in Thwack points . . . there's an idea Bitcoin didn't see this coming

Usually network traffic data is done by using netflow or its counterparts like sflow and jflow Solarwinds NTA does a good job Lan Guardian is a more robust and comprehensive trafflic analyzer

L3 settings will not make any difference to your L2 or L3 switches if they are operating at L2 only I had the same problem as Richard, where UDT just lost the device info, which was a UDT related problem. Just started to work after the job engines were reset

What are your polling intervals?

anyone ?

tim.l.nelson and wildrussian the closest I got to bare metal recovery was to replace IP address and SNMP credentials on new device so NCM can connect to it using the connection profile setup for that device and upload the config. in the case of a switch I mentioned above it works, in the case of a router it may not be as…

I have been trying this as well, with limited success. See it here: Upload config to DELL PowerConnect 6248 & 7048 not working I can successfully upload backed-up configs to a switch, if the switch is set to factory defaults, with the original IP address re-configured. I would connect to the switch via console cable, reset…

Greetings, choly and michal.hrncirik thank you for your replies ping-a doesn't resolve the domain name My DNS setting is set to Persistent might this be a problem with my internal DNS servers?

I have the same problem. My jobs have been stuck for several days and new jobs are not running

I wanted to create a simple report using the web-based report writer that lists all the nodes with expired EOS I was able to do this as follows: Start with the "End of Support" report. this assumes that you have the EoS dates for the nodes already in NCM Duplicate and Edit the report Edit the "End of Supported Devices"…

Presently there is a product called Mobile Admin that allows you to manage NPM from your mobile phone Android, Apple and BlackBerry are currently supported. Windows Phoen not yet supported but hopefully soon. you have to download the software and deploy to your mobile handset. Mobile Admin hope this helps jesclynlapizar

out of the box, all private IP addresses are caught by the defaults Admin > NetFlow Settings > IP Address and Groups Define your networks the highlighted ones are the defaults, which I no longer use When done you will get the following after some polling time:

I am actually experiencing this for more devices than the Cisco WAP4410n, It happens for my APC devices - In-Row Air coolers, PDU and UPS's Can this be mib related?

Was this ever resolved? I have the same problem. I have version 2012.2.2 and it shows that the WAP4410n constantly rebooting. It isn't at a constant interval, just random events. The WAP has not rebooted as I was connected with my laptop and using it during some of the reboot times reported by Solarwinds. From Solarwinds I…

I am also interested in what Bain_606 requested. I am about to upgrade my Checkpoint firewall and would like to include it in my SolarWinds monitoring.

I am having the same problem. I am running version 2.5.1 and I cannot see hostname and IP addresses for ports not all ports display MAC addresses either

I have a custom poller for all my APC UPS named UPS_TimeOnBattery I have an alert set that triggers when the value of the poller is >0 This alerts me that the UPS is running on battery

Really good thread cnorborg would it be possible for you to help me change the SQL code or refer me to a SAL manual that lists the table name for PART number? my default EoL table lists my switches models by "Part Number" instead of "Model" My SW Default NCM table Your Query results:

mungerman​ I have NPM and NCM working very well in my environment Firstly ALL of my switches and routers are managed by NPM, and I use NPM pretty exhaustively for alerting and combined with NTA for traffic monitoring. I have been using these for the past 3-4 years and have seen most of the benefits that they are marketed…

I would also like to see this feature. Please create a feature request. You have my vote for sure.

I use Sflow as I have an All-DELL PowerConnect environment been using NTA on the same server and database as NPM without issue, but I have 30 nodes

jesclynlapizar using NTA is a 2 phase approach 1. Install NTA on your Solarwinds server This is relatively simple, download and install The most important configuration would be the port the NTA server listens for netflow data. I use the defaults 6343 found in NTA settings 2. Configure your network devices (switches,…

Upgraded to NPM11.0 and issue persists Thank you for that suggestion on the AIR1141 papitts

Orion Core 2013.2.0 NPM 10.6 was waiting on 10.7 to settle before I upgraded Thanx for the update on the feature request being implemented. I will try latest version and let you know.

seriously ???? no one has a recommendation?

can't say that I encountered any issues