rdeprez

I have a request for the Syslog engine. I think it would be a pretty easy thing to do programatically. To help resolve a PCI audit exception it would be great if the Syslog service could write a checksum for each syslog entry written to the syslog table at the time of insert to the DB. Also providing a way to verify the…

That did the trick. Thanks for the quick response!

UGH....just applied the hotfix and the problem is back....Tried copying the fixed classicproxy back over again and no luck. I get this... Orion Website Error An error has occurred with the Orion website. Additional Information System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a…

Mark, When I click on the file I get the 404 error page.("oops something went wrong") If I right click and do a save as I get the option to save the error page. I don't see a new email from support with the attachement so can you try posting it again?

I applied hot fixes for both 8.5 and NTA 2.2. I am trying the new file posted now and will reply with the outcome.

Joe, I got it. It works! I was able to set the require secure channel option in IIS and browse around. I don't see any broken links or problems yet. I still have to add all my customizations back in and fix path problems but the base install works with SSL now. I'll post again if the customizations do not work with SSL for…

there was no attachement in the email. I responded asking them to resend the fix.

John, Can you post what you have in your 01-AdvancedNodeDetails.Resource please. Thanks

Joe, I responded. No change to the behavior. The new diag is attached to the case.

I was able to get it up and running again by disabling all the ports listed in the 'NetFlowSources' table then reenabling them one by one. I have found the interface that is causing the problem. I tried deleting it, performing db maintenance, then adding it back in but it still hangs the netflow page. Any idea what it…

Hi Denny, I thought I'd give this post a bump and ask if you have a release date, or even a swag release date, for the version with this functionality? I too am interested in this feature to suppress monitored edge/access switch ports from dominating the events view but still be able to track counters for those interfaces.…

For those who are experiencing this problem, do you have session tracing turned on and if you do what is it showing? If it reveals an error would you post the session trace here for review? (I know it goes without saying but ,please be sure to remove anything that may be sensitive to your environment.)

Hi Andy, I am also very interested in seeing this functionality built into Orion instead of having to hack it together with the custom poller. The items I would like to see would be the class-map name and description assigned o each interface, the drop rate, the total drops, and the offered rate per class-map. Also, for…

I just upgraded to Netflow 2.1 and when I click on the netflow module I see the 4 'Loading....' boxes but nothing ever comes up. If I go to the netflow settings through the admin menu after about 5 minutes or so the first 7 interfaces (out of about 40) come up and the below error message is in the "Time Date Received"…

17782 is the case number. Thanks Mark!!

This was a problem for me. If there is a vlan assigned to a switchport that does not have an entry in the cam table the port mapper will freeze. An example of this condition would be setting unused ports to a vlan that is not listed in the VTP domain the switch is a part of. This can happen if you have removed vlan1 or…

I am trying to follow your wonderfully detailed instructions, but I have obviously missed something along the way :) When I click on a node in Orion to see the details, I get the following error where I would expect to see the links for telnet, ssh... Microsoft VBScript compilation error '800a0408' Invalid character…

We are about to start round 2 of the VoIP beta program and are accepting additional participants Let me know if you are interested in joining the beta program. Count me in Haley!

I was also getting the unable to update configuration error. If you uncheck the 'require SSL' option in IIS under directory security you can run the configuration manager and hotfix without it throwing an error. I was instructed to install the hotfix as well by support and get the same error now for all SSL pages.…

hmm. You can try an Add/Remove Programs -> REPAIR to see if this clears up. If not give this a try...bring up a command prompt and go to the Windows\system32 subdirectory and type the following: C:\WINDOWS\system32>regsvr32 OrionReportView8.dll C:\WINDOWS\system32>regsvr32 OrionReportView8.ocx This may register the needed…

This is in the works for SW I think but not ready anytime soon. Why is it a tough sell to remote into the server to add devices? How often are you adding/deleting/changing devices? We have over 700 nodes and using a terminal server session isn't a big deal. BB There are about 3000 nodes that would have to be added to the…

I would LOVE to get this implemented in our setup. I tried following the instructions above but the Java app fails to load once I click on the 'S'. PLEASE is there anyone who can help me with this... Make sure your browser is set to use Java JVM instead of the MS JVM. With the MS JVM selected it will just say the applet…

This is my all time favorite post... Now that I found it again I'll have to give this another shot in 8.1 If anyone gets it to work in 8.1 post your code... :) I followed Ian's Excellent instructions and with a few changes got this to work in 8.1. I downloaded the AdvancedNodeDetails.resource from the customer download…

Doing a 'show running-config' will provide the current running config of the wireless lan controller. I would like to see the wireless module support these devices as well. All the information that was gathered from the stand alone AP's is contained in the 1.3.6.1.4.1.14179.2.1 mib tree on the WLC's. I know it's formatted…

Do you think that is functionality that could be included in a future release?

I had this issue when I was running NPM/Cirrus in a VMware environment. At the time I couldn't tell if my network devices were being fickle or if it was something with the virtualization or the constant 60% to 80% load the server was reporting. I moved to a real server with more resources and haven't had a problem since.…

I think this is what you are looking for. http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K20090806 which leads to here http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_command_reference_chapter09186a00801eaed6.html#wp1729603 and describes the syntax for the 'ip flow export…

Can you give some examples of what you are using for the filtering criteria? If I can recreate the problem on my side I may be able to hel Hello All, I am having a problem with the Syslog Summary Filtering feature. If I choose to view the syslog summary by IP address, Message type, or any other filter, the syslog message…

We commonly receive requests to be able to view configurations, config change reports, and inventory reports from the Cirrus Configuration Manager from the Orion web console. This feature has been available in the Additional Components section of the Customer Area for quite some time but many users were not aware of its…

We commonly receive requests to be able to view configurations, config change reports, and inventory reports from the Cirrus Configuration Manager from the Orion web console. This feature has been available in the Additional Components section of the Customer Area for quite some time but many users were not aware of its…