Comments
-
I'm not seeing an "snmp-server user" line in your config. You should create a user and make them a member of the group you already have
-
As mentioend above, I was already aware of this tab and I don't believe the guide is referencing this. I don't see any 'Interface Details' List, Refresh or Auto-Refresh buttons etc.
-
It is my understanding that a node is marked "compatible" and enabled for the Switch Stack poller if the config contains a line that says: "switch 2 provision....." "switch 3 provision....." "switch 4 provision....." etc. as this suggests there is at least a second switch. Check the configs of the single-switch stacks and…
-
Do you have NCM? There is a default report called "Cisco 3750 Stack - Physical Entity" which provides most of the info you require (except for which switch is master, member, etc but that could probably be added by editing the report)
-
@"whitebd" no, I don't believe they are. These look to be the JBL Live 500BT model
-
Unfortunately, we could never get alerting to work with Cisco APs. I believe it all comes down to the "Node ID" in the Orion database. Example: A Wireless AP attached to the main controller has an Orion "Node ID" of, say, 36. You move your AP over to your secondary controller whilst you do maintenance on the main…
-
We use VNQM to monitor our 8-node CUCM installation. First step is to follow the instructions here: https://support.solarwinds.com/SuccessCenter/s/article/Configure-Cisco-Call-Manager-for-VNQM We use SolarWinds Free TFTP Server to get the CDR records from CUCM to our main polling engine…
-
@"jblankjblank" We're on 2019.4 HF2 Just to confirm, can we apply the script (https://support.solarwinds.com/SuccessCenter/s/article/Update-SolarWinds-Administration-Service-to-leverage-Pre-Staging-capabilities-for-2020-2-RC-Upgrades) to update the solarwinds administration service right now? Or can it only be done if…
-
You mean these? http://www.solarwinds.com/documentation/en/flarehelp/orionplatform/content/core-orion-variables-and-examples-sw1115.htm
-
I would at least hope for a facility to import a list of Session names/IP addresses so that I don't have to do one at a time - but if this could ultimately tie in with the nodes in our NPM environment, that would be ideal
-
I have "frankenstein'd" the Firmware Upgrade templates so that it can handle stacks too Got a working method for 3850/9300 Bundle Mode stacks and 9200 Install Mode stacks The "wait time between reboot and checking node is up" feature will be magnificent for this, as stack reboot takes longer
-
Just curious - do you have NCM? This will allow you to report on every switchport via the NCM Inventory
-
(Similar issue to RichardLetts #3 in his post) We attempted to make Thin AP alerting work in our environment but in the end, had to disable the alerts as they were giving us false information. We have HA Cisco controllers, monitored by both Orion and Cisco Prime Infrastructure. We've been looking for more ways that Orion…
