profzoom1

I would like the ability to customize the popup to what ever information that my boss wants added to the popup :). I don't have specifics but different nodes have different things that will need to be monitored and available with a mouse over from a circuit ID to temperaturesl to power levels.

All the way up until you mentioned me creating the script with VBScript, it all made sense to that point. Sorry but when mentioning scripting I lock up and can't do it or takes me forever to get anything that works. A big area that I am not comfortable doing or attempting unless it is just changing someone else's scripts…

Another issue to report now. Custom properties for alerts are not working. I have custom alerts setup and custom properties in these alerts and after the upgrade the alerts are no longer working when we have device go down. I am able to test fire alerts just fine, email and everything else works when I test. When I…

Mine are all set to go to an IP address but still erroring out. Is there a place in Orion to specify the trap server, I have not found it.

That worked like a charm. Is there anywhere to find references on how to set these up? I would have never thought to use \\ between each folder name.

Thanks much that worked great.

I am able to run this report (Configuration Modified Report Last 24 Hours) and receive notice that changes did happen and by the person making the changes so I believe the fist part of setting this up is working. My big problem is the 14 steps after the first one to make this work. I can't get this part to work * Open…

Working with Cisco tech this afternoon and this may be a code bug. VTY lines are not releasing or clearing on disconnect and when issueing a command to the switch it locks up that VTY line and will not clear, console is even locked up at this point. I am going to have to reload the stack tonight after business hours. If…

Had this working by turning off UA in Server 2008 at least that is what I had thought fixed it in EOC before but now after adding another NPM server to EOC the maps have reverted back to giving me an error again. Error: Could not load file or assembly 'SolarWinds.Shared, Version=1.0.0.0, Culture=neutral,…

Available now, Thanks

Yes I have walked the device with the Engie toolset and I can see them but not sure how to get this working. I have opened a ticket 55477 with support

Has a report been created to show what alerts are setup for each node in the database or is this something being worked on for future release. I would like to have a report that shows all alerts by node and what the trigger and reset is on the alerts. I am not able to create this in Report Writer since it only has basic…

I am not liking - "dis-like" the new Thwack layout and I ma guessing this is why my 2 questions on Network Capacity planning have not been looked at or questions answered yet. I can't even find where the forums went. I did find them once but now I lost them again. Why do we not just have a FORUM button or tag at the top I…

Ok so the current CPU monitor in SW NPM is basically an average of all CPU cores in the server so there could be 1 core maxed at 98% and 3 at 0% so the guage would still show 98% utilization or 24% and we would not be able to tell that only 1 CPU is having too much load on it? I only ask this cause I know that the current…

I have opened a case for this Case #49582 If this was a problem 8.5.1 then why am I and others only having an issue or seeing it after the upgrade happened? I can only hope that it is fixed now that it has happened.

looks like that link is only for 8.5.1 notes not 9.0

Thanks for the reply. Since I was not able to go to InterOp could you post some screenshots of the different page views? I would like to see what was done and how it all looked in Orion and if I could do this to ours? I am looking forward to the blogs and will try to incorporate some of this stuff into our site. Any chance…

This is what I have for my Volumes to trigger an alert Volume type = fixed disk ---> so that I don't get memory or other things classified as Volume to trigger this I wish SW would fix this so you didn't have to have this step. Volume percent used it greater than or equal to 90 see if that will works my alert email then is…

This is possible today? If so how? If not any chance this can be more then just put on the radar and start being put on a path to a when will it be available? NTA is great for seeing what traffic is going on the network just wish it could do a little more to allow some alerting. Having netflwo alert me when something…

Not enough room to capture the entire page we have setup for our NPM or EOC but here is our EOC Dash.

We are also seeing the same thing on our server, please report the resolution once found on this thread.

You set this on the netwrok summary page, edit the volumes with High Percent Usage and just add the filter "VolumeType LIKE 'Fixed Disk'" in the Filter nodes like below and that should only return the actual volumes on the page. Edit Resource: Volumes with High Percent Usage Title: Subtitle: Filter Nodes (SQL) Filters are…

I don't think I could be more frustrated then I am right now with trying to get this to work. I may be over thinking it or not reading correctly in my documentation but I would think this is pretty straight forward in what I am asking here. This is the simplest way of saying what I am trying to do. APM checks website to…

where do I get the script or find it in APM 2.0 since I am running this just haven't come across it yet

I have tried using the SNMP OID monitor in APM 3.0 Sp1 and I get the following error when trying to monitor OID 1.3.6.1.4.1.232.15.1.3 or any other OID for that matter. failed with 'Undefined' status No Such Name Not sure what is going wrong but that is the error I am getting and I have this OID setup in the Universal…

No more information on this?

That didn't work, I copied the file is the zip to my Orion folder and tried opening the Universal poller and same thing as before "item with the same key has already been added" What now?

I found another issue as well We have a few Cisco 6513 switches with unrouted vlans which do not have a port speed associated with them and Orion has configured all these port speeds as 10 Mb. These should all be showing up as gig ports like they have in older versions of Orion and now I have a bunch of high utilization…

As for the power level adjustment it did the default to 0 which I believe got me into this mess and I quickly tried to change that to 10 and execute the job again and it will only give me the error above if I select all the ports in the stack. I have tried executing it on like 10 ports and it completes but the stack never…

Bueller? Bueller? Anyone have any ideas on this?