neomatrix1217 ✭✭✭✭✭

Take a look at this KB article. https://documentation.solarwinds.com/en/success_center/whd/Content/HelpDeskConfigureAuthentication.htm

If you are adding it as a widget you want to look for it as the name you saved it as and the same goes for the dashboard.

I don't see that we get those values natively on the wireless page you might need to create a universal device poller. https://support.solarwinds.com/SuccessCenter/s/article/Wireless-OIDs-polled-in-NPM?language=en_US

Did you follow the steps outlined in this KB article? https://documentation.solarwinds.com/en/success_center/wpm/Content/WPM-Recorder-Download-File.htm

If you have NPM you could also do this with NetPath.

What credentials do use to CLI into that switch? 

Why not create the alerts from log viewer? https://documentation.solarwinds.com/en/Success_Center/orionplatform/Content/LM/LM-Alerting.htm

NetPath requires an probe/agent to function as long as the end point is a TCP port you can see the path from a workstation/server and see the path to it's final destination. https://documentation.solarwinds.com/en/Success_Center/NPM/Content/NPM-NetPath-requirements.htm

Do you get any error messages?

You can edit this report it is written in SWQL and you can also check out this other post. https://thwack.solarwinds.com/t5/Report-Lab-Discussions/Report-for-Exchange-data-from-AppInsight/m-p/197614

https://documentation.solarwinds.com/en/Success_Center/vman/Content/VMAN-Polling-Options.htm

You can always change the time the Orion DB maintenance runs so it does not collide with your other jobs. The link below describes how you can edit that setting. https://documentation.solarwinds.com/en/Success_Center/orionplatform/Content/Core-Running-Database-Maintenance-sw1925.htm

If you ping that windows machine from the Orion server via hostname what comes back? Do you recognize that IP?

Someone might be able to write this SWQL better but here you go this was done as a table in the dashboards SELECT Count (n.MachineType) as [OS],n.MachineType FROM Orion.Nodes n Group by MachineType

What kind of device is this and what polling method are you using?

Hello, the KB article you referenced is for loggly below are the actions that Orion can do including a Get-Post request. https://documentation.solarwinds.com/en/success_center/orionplatform/Content/Core-Available-Alert-Actions-sw1076.htm…

What is the reason for the "new" events console? SolarWinds has been transitioning off of the flash console to HTML 5 since we all know that flash will not be supported at the end of the year. Is it to replace the existing console which is flash based? Yes that is correct see link below…

Nothing has changed it should be there or you have a corrupted installation and I would re-run the config wizard or look here to make sure. C:\Program Files (x86)\SolarWinds\Orion\NPM

You should post this question in the NPM message boards.

This KB article should do the trick https://support.solarwinds.com/SuccessCenter/s/article/Bulk-change-the-status-and-response-time-from-ICMP-to-SNMP

You can also take advantage of the new dashboards for TS widgets. https://oriondemo.solarwinds.com/apps/platform/dashboard/1 https://thwack.solarwinds.com/t5/The-Orion-Platform-Documents/Orion-Platform-2020-2-Modern-Dashboards/ta-p/586258

Have you tried during a regular putty session outside of the Orion console using the credentials you are trying in the console you can use solarputty to test. https://support.solarwinds.com/SuccessCenter/s/article/NCM-Error-Connection-Refused-by-A-B-C-D

What is being used as a default when you go into the user/group account settings?

You can do this with SAM https://support.solarwinds.com/SuccessCenter/s/article/Monitor-NTP-drift-for-Windows-servers

Can you show us how you created the report?

1. Is there any connector which will catch up all those application log? Take a look at this KB article and see if that helps https://documentation.solarwinds.com/en/Success_Center/SEM/Content/Admin_Guide/6.1-configure-sem-to-monitor/sem-windows-audit-best%20practice.htm 2. If i need a connector does solarwind support team…

There is a limit to this feature of 10 maps total

So the old SAM component-based licensing would work this way see below for your example and the scenario taken from this KB article further down also remember that SolarWinds no longer sells component-based licensing it is now node-based. 1200 Nodes = (NPM 500 +SAM 700) 1200 Volumes = volumes (the number of volumes matches…

Can you provide us with more details on what does not work?

Do the following Edit the Following Table Engine table, VOIP Engine table, and Orion Server table to clear the entry name for the Main Poller