mcbridea

It sounds like what you would want is to either lock the y-axis at kbps or have a logarithmic y-axis. These are not features today but I'll move this to feature requests for future consideration.

Nothing obvious in the script. I think aLTeReGo is on the right track.

I have not tried this, but can you customize the NPM page and add that resource? If not, let me know and I'll move this to the FER forum.

Have you tried using UnDP and walking the MIB on the devices in question?

8.5.1 is still supported if you have maintenance. Here is a link to our presently supported products. http://www.solarwinds.com/support/supported_products.aspx

If you post the poller in Content Exchange with a note that it is still being developed we can DL it and look it over.

Have you tried Engineer's Toolset Switch Port Mapper?

If you only have 2 exports going you should be ok but I'd check the router CPU to make sure. Andy

You are correct in that the entire db is scanned for the suppression condition but this is done as a combined query with the trigger condition, so the two examples would be equivalent. (Unless there is a nuance I'm not getting)

Hmmm. I'll have to check with dev on that one

I know this doesn't help your case but we have tested on 64bit without issues. This looks to be an environmental issue. I didn' see diags for this ticket. Can you send your diags to support? This will help understand the issue you are seeing.

Kindbro - the screenshot you posted does not show the interface of interest. Can you click on the + next to the green button and see if that interface is sending data?

Manual addition of IP SLA VoIP operations have been supported since 2.0 The Forum is gone as the launch was a while ago. 2.0 launched last year and 2.1 launched May 12

The extra NPM/NTA works as a remote reciever. That's how it is done.

That will not work

Settings on the upper right corner of the NPM web console.

Do you know what the storage for SQL is? We recommend RAID 10 and there are known issues on RAID 5 and some SANS.

See the Logo URL setting in Web Settings. Set it to NoLo.gif to miimize the logo bar. That is a small as you cam make it.

Yes - apply it to routers connecting any VoIP sites and according to your topology - hub/spoke or full mesh. Andy

Seeing as it restarts when the config is changed I'd say it is a problem in the device.

I use Node special properties to mark all servers. If you include the domain in the special property the rest is easy. How many servers do you have?

Reinstall SP1 and you should be good to go.

Please do open a case on this one.

Please add an email address on your profile and I'll contact you

IT is in the DL package that was installed tothe desktop. If you deleted it just DLAgain, unzip and itWeill be there SEnt from iPad

Not in the next SP but next release

That feature is not in the historical NetFlow product (NTA) but we are looking at how to add it.

http://www.solarwinds.com/customerportal/

Does it look like the posted sample will work for you?

I am impressed that he joined thwack 16 years after his death! Now that is an inclusive community.