marnell

I have more than 50 3850 being backed up through SW with ssh setup as auto. When you do a test with the creds do they pass? If yes then you should have no problems.

When you log into SolarWinds you can go all the critical and warning device(Network Device as an example"switches"). Once yo use select one you can go to hardware detailed and go to current hardware health. That module will show you the hardware in the warning or critical state. Below is a screenshot of what I mean. Why am…

is there a way to run SW in a GNS3 environment to be able to test the scripts? Would be something to assist with users who need help with the scripting portion?

This is what I used and got it working. Process: The command downloads the bin file to the switch from your TFTP server (x.x.x.x) to the flash memory. Replace the x with ip address of your server. This is the name of the file with the extension. I left a space so it will keep the name of the file as it. This then begins to…

then doing this When you edit the table for the report, try adding a column. Orion Object: Interface Group By: No Grouping Select Interface History on the left panel then in the middle, it will show all available data that the web console can compute. The best options I can see are the following: Total Bytes Transmitted…

I was able to get it working by doing this 1. Login to Orion web server and launch Orion web console. 2. Click Report > All Reports > Manage Reports. 3. Look for Global Top 25 Interfaces by Traffic Utilization, select it then click Duplicate and Edit. 4. Rename the report to any name you want. 5. You will see For drop down…

Does anyone have a video to see the process? I am trying to see if I can get a test lab switch to a stack switch ISO upgrade.

Do I need to run any scripts to upgrade my firmware of a cisco 3560 8port swith or once I have NCM push to the system it will reload and update it?

Hello All, I am trying to create this same rule but I where I work I have over 20 wlc. Is there I can get an alert on the ap for a specific set of controllers? I am about to create a test alert, then give NPM 10-15 mins to collect information on the wlc's. Then shut the port down on an ap and see if I get the alert. I will…

Some of the fields depend on the smartnet account you have? Some have an extended time of support. This is why I believe they give you the option to set the dates yourself. This would be hard for SW to sync their DB with cisco EOS dates.

do you have a login profile setup? if not then this may be the reason.

Yea they are all 5508. Would this a cisco issue or something SW could get working with a new patch or update?

I already had the options checked. Still not seeing data from the WLC like I do on my ASR. Can I use the same port 2055 or should I use a different port?

I have a network with a 4500x in one building. Netflow would not work on my uplink, but it did configure on the vlan that the switch ip is on. So I let it run for a few days and I still do not see anything showing in NPM. Would it be better to setup netflow on the next 9k rather than the distribution switch in each…

thanks