lmantonio · Network Engineer

Thanks for working hard.

Thanks I fall behind, but with your quick response and I some help full info on Cisco documentation, I'm back on track. 

Thanks for sharing

Good write up. I just finish my upgrade yesterday to 12.2 some weird issue after upgrading the NCM 7.7 the main POLLER stopped working but recover after 12 hours. Don't know what happen it recover itself. Glad that when I'm wake up this morning new version was functional. Observing

I'm supporting this request its nice to implement it without a for full Admin right. IT Security team will get concerned if everyone on group users have Admin rights. Just because if Firmware Upgrades.

Great write up. Do you have a link where can get better understanding on the details on the following: 1. Flexible Netflow vs Netflow should I used both or just ether one template for Cisco ISR. 2. FNF or NTA or NBAR2 are they're having different functionalities?

Missed that questions 3 and 8 

Great post still not clear to me on a 1 hour report I'm getting these results on the same device and interface. i think the timing computation is not clear to me. Please comment how will I do this right? Utilization is 150Mbps /1 Hour for NPM Utilization = 250Mbps/1 hour for NTA

Good luck. Stay healthy

I experienced that I cannot find the ACL's until upgrading to NCM 7.7

Two years old problem, I'm having thee same issue anyone from Solarwinds have updates? 

Thanks for your attention and help me to correct my goal. Which is to limit teams' abilities to manage their own equipment.

I open a case. I can see that as long as you set the time stamp in the absolute value within the last 1 week, it is accurate. The issue appears if you set the absolute time value after more than a week. The Timestamp are off. You may try in your convenient time this NTA behavior. Thanks for your attention.

Thanks for your time and understanding. I think my post lacks detail allow me to clarify. What did you expect CLI polling does? is a very good question. After the enable cli polling box checked in ASA. The Orion constantly authenticate every two minutes and it will immediately execute terminal pager line 0. This is a…

Hi Bravosa, We hold this integration project about six months ago and stopped working on it. Apolgy for not giving details. Best Regards, Leo

Interesting and thanks for your help, I'll try this and will give you feed back but basically what I'm trying to do is to limit a users group to view only their device , Like network group can only see Network Router and switches , Telecom group to see only their device , Facility to view only the status of UPS . I think…

Sure , I'll try it. thanks

Thanks for quick response looks like that is all I can do for now.

Thanks for your respond. I'll try that although in our environment the management interface which is use for monitoring through SNMP and NTA source flow are on different source interface

Thanks for sharing , It works on my Kiwi Server

Yes the device are separated via Firewall. I setup the new Poller to the DMZ area. The idea is to monitor a separate segment

Sirpaw, BTW: The details on your screenshot above is there. Thanks for your attention and appreciate the response. 

Sirpaw, I attach the the screen capture. The affected CI should populate with the name of device (hostname, node name or systems name) I try different variables and all variables but still failed. I'm not sure where to check in the Orion DB as per your comments. Th e ticket was created but within the SNOW incident it is…

Thanks it is well said.

Thanks and appreciate your insight.

That is helpful and I learn, however my question was when I build a new server, I saw on the console device>configuration. The running configuration records available contains to as much as 1 month old on it. I wonder where are those backup file resides, which server or drive?. if I check the…

Thank you for your email. I'm trying to get a report from NTA and here's my observation on the Netflow screen I set the time Period in Absolute setting from 5/6/2018@12:am to 6/16/2018 11:45PM. On the Netflow conversation summary it is set to automatically from 5/5/2018@5:pm to 6/16/2018 11:45PM. - I need the time stamp…

I'm recalling the question , The answer is on adding a new widget

This has been resolved with the help from ServiceNow . I can't find a work around in the Solarwinds just for FYI

Thanks for the help