johnwilly ✭✭✭✭✭

Thank you. Let me review this with the firewall team and confirm you back how it goes.

I believe it's a Palo-alto firewall. Found these logs. SWIS v3 (Inner Exception #0) System.TimeoutException: The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The socket transfer timed…

Yes, the Administration service is restarted on both. Firewall ports are checked, no packets denied. Telenet connection is establishing between the required ports. Not sure about the Wan accelerators part. I can get that checked.

It is around 120ms and working for some time. We recently installed 2020.2.4 and this happened 2 weeks later.

Can anyone suggest?

I got the NAM 1000 License. i dont see any license on the Portal to activate APE. I was told we could spin APE's without additional cost. How does that work?

Sorry for the late reply. The ticket # is 903523 This is the latest update. They are suspecting a bug. Hi Reuben, It sounds like you are running into a known issue in your environment. If these alerts were over 30 days old, I can explain why this is happening. Once you have active alerts for >30 days and the alerting…

Nice one, Thanks again. I am working on this right away.

Thanks, i tried it but it still didn't help. Just to make things more clear when i say the alert gets re-trigged, it is not showing in the Active alerts page that it was recently generated.It shows as if it was generated long time back. However the Alert actions i configured for that particular alert say for example "send…

This is interesting. What would be the variables should i include in trigger action to receive an email Showing which AP on Which Controller disappeared?

Thank you So much for helping Alex.

Yes, it is re creating the alerts.

Yes I have NCM NTA UDT and VNQM along with NPM.

Thanks for the confirmation Alex.. I'll try to test them if possible.

OMG Thank you Alex, I never knew we had an option to modify the display setting. Awesome Bonus tip.

Thank you for the information David. This is a great relief. I will do the same for APE. Cheers

Hi Vinay, Would like to ask if you can modify the sql coding you have provided to something where it will reset even if any 1 IP is UP? The Trigger is perfect Thanks Reuben

Sure Vinay, Thanks for helping

Thanks for your quick reply Vinay. I will try them now. Just to check, Will this below work as well. Node Status is equal to Down IP Address is equal to x.x.x.x IP Address is equal to x.x.x.x So this one below? Where (Nodes.Status = '2') and (Nodes.IP_Address in ('10.X.X.1','10.X.X.2')) Thanks again

Hi, Sorry for not mentioning, This is report is configured only to show data for the last 24 hours. Please find the attached report. Dropbox - Wan_Links_Utilization__-_Last_24_Hours.OrionReport

looks like this is a Bug. If you are modifying an alert and if there is already an active alert for this alert which was trigged more than 30 days ago, It is going to immediately re-trigger the alert actions again. Hi Reuben, It sounds like you are running into a known issue in your environment. If these alerts were over…

Well that's how it's supposed to act., however though the alerts are still active it is retriggering them again.

No after making the changes if i enable them, It still triggers the alerts again.

Hi Pavel, Thanks for your response. Can you please let me know in detail on how to do the above. I have some IP's with 10.242 series and for them all interfaces needs to be monitored and for the rest of the series like 10.252 etc only interfaces marked as MP needs to be monitored. Now i have all the interfaces enabled and…

Yes i have. This is not just related to Interface like they mentioned in Hotfix. I am getting Alerts for Power supply , Utilization ,etc etc. Its just random. Every time it pick different old alerts which are already active in the Alerts page for a long time.

Can someone please share the JSON Script and the 2 Powershell Scripts? It seems the one mentioned in the PDF when copy pasted gives error.

Thank you so much. This really helped a lot. Yes, if all matched interface would have shown in a single dashboard it would be cool. However this is good. Saved me a lot of work

Will we be able to create a Perfstack containing interface Tx/Rx % Utilisation using interface custom property?. For example, All Interface containing Custom property Wan_link = yes should be on a single dashboard reporting its TX/RX Utilisation or Peek Utilisation. .

I am unable to select the newly created custom Poller for this resource. The Drop down does not show anything. Can you please check...I am on 11.5.2 NPM Version.

Finally was able to fix the issue of Memory Utilization not showing correctly for ASR 1001 devices using Poller Checker Tool. C: > Program Files (x86) > Solarwinds > Orion > PollerCheckerTool.exe Select the Node and Poller as Memory and Click on Detect Poller. From the list of Pollers that popped, look for the ones that…