joehanly

Comments

  • Ok I understand what your trying to accomplish Here . What you really need is a list of all the interfaces on switches that are being Used and Visa Versa .Am i correct here ? How you could achieve this is by ensuring that all your edge switches which users connect to are managed in Orion system manager and that you select…
    in How many of my interfaces are actually being used? Comment by joehanly June 2008
  • Hi You should also look at the validity of the messages you are receiving.Do you need to reive them all ? What Severity do you really want ? You can create filter rules based on this in the trap Viewer also. Thanks Joe
    in SNMP Trap messages climbing rapidly Comment by joehanly April 2010
  • Hi Magnus Once you have created the custom Property and assigned it to your nodes you need to run the account limitation Builder From advanced features in the Orion Menu Open this and Select add limitation. Give the limitation a name and then select nodes.sla From the custom property Dropdown menu. Enter the Selection…
    in View limitation based on custom property value Comment by joehanly September 2008
  • Hi there The issue you are running into is related to logic and way you have Your alert Setup. The suppression Logic is not applied based on that specific Node But with any node that is in an unmanaged state. So when you apply that suppression what is happening is its looking at any node that's unmanaged and stopping that…
    in Alert suppression when Node is UnManaged does not work Comment by joehanly September 2008
  • Patricia I have your case. Since your diagnostis are 13mb I have given you a site to upload to within the case Are you having any issues with connectivity to thoose devices ? Can you check the average reponse time on them and See if there are any timeouts . Joe
    in IP address continually going into Unknown state Comment by joehanly August 2008
  • Hi can You please log a ticket asap At your Customer Login Portal and I will get this worked oin for you ASAP Regards Joe Hanly Emea Technical Support
    in OrionWebSite"Error" Comment by joehanly November 2007
  • Hi from the below link on the Cisco site it states that it is supported You may need to upgrade your Cisco ios for this http://www.cisco.com/en/US/products/ps6545/products_data_sheet0900aecd80322aeb.html Regards Joe Hanly 
    in Does Orion support SNMP v3 on Cisco Catalyst express 500 Comment by joehanly December 2007
  • Hi Sorry your having this issue. Firstly Do you have a lot of traps in your trapvarbinds table. Can you check the size of this table for me. To do this open database manager and connect to the database. Scroll down until you see the trapvarbinds table.Right click anbd select table details. This will give you an indication…
    in Trap Summary Slow Comment by joehanly June 2008
  • This Should not happen The service should start automatically when you reboot the Server . Check the Services Option in computer management Ensure that the Service is set to Automatic on start-up. You may want to try a reboot and before you open system manager Use Orion Service manager option (Under Advanced Features) and…
    in Polling Engine restart after reboot Comment by joehanly August 2008
  • Hi Rob Unfortunately this is not possible at present. The Netflow module utilises the managed nodes In network performance monitor. If you really wanted to separate the two You could look at another Orion for Netflow and just move your Netflow managed nodes to that poller This would ensure that the two are separate. Your…
    in database question for netflow and orion Comment by joehanly July 2008
  • Hi Unfortunately not. When you add a node in Orion and do a list resources you are typically reading the SNMP information and detecting all the interfaces that the device has. Orion uses SNMP to read the Mib table for the device and Retrieve the interfaces .If you do not select them then you basically telling Orion To…
    in Problem...would like to add single interface Comment by joehanly February 2008
Avatar