geo1 ✭✭✭✭✭

Dear Team, [View:/cfs-file/__key/communityserver-discussions-components-files/4/Copy-of-Memory-and-CPU-Utilization.xlsx:820:615] We are getting 0% for lot of devices . Please find attached table with device model and the device identification oid and cpu and memory values for your reference.

I have checked for snmp gen3 itself. But cpu showing 0% or 1%. The real values ins 6%.

I have checked for snmp gen3 itself. But cpu showing 0% or 1%. The real values ins 6%.

Hello Maciej,

Hello Maciej,

Hello Maciej,

Hii, I already did that and all the interfaces in Solarwinds is same as the output of snmp walk. This is a Brocade SAN FAbric (with 2 Virtual FAbrics). Upon more drill down, its found only down interfaces are getting listed. Any of you has such experience. From SolarWInds (No interfaces up to port 24 which are UP) From…

Thanks. a lot.. Another Concern is that i could see temperature sensors for interfaces, modules, additional cards etc.... Which is the sensor which would be ideal to select. Moreover, can i know how to get the Threshold Values through SNMP. I have enabled Hardware Sensors and each sensor is showing current value. Your…

Hello.. We have devices like C9300L, Catalyst 3560, 29xx, 2921X, 4331 ISR, Catalyst 4500, Catalyst 68xx, Catalyst 9300, NExus 7K. Also i can see a large number of sensors for each node Which is suitable for the Alarm... Each giving different values.

Thanks.. My issue is that there are different models and for each model Cisco has specified different Temperature range. As a result we thought of take the alert from the Syslog. Moreover, the SNMP is giving a lot of sub parameters which makes more confusing. If you have any good suggestion on which SNMP parameter would…

Hii As i need the Blade Name and Blade Slot Number based on the Custom Pollers. could any one assist us with a query of the same. This result i obtained by running the below query: select cps.RowID,cpa.AssignmentName,cps.RawStatus,cps.Status from [dbo].[CustomPollerAssignment] cpa join [dbo].[CustomPollers] cp on…

Hii, When i test oid, its giving me integers. However, in the Orion Database custom poller status table, its shown as success or failed. One blade is failed when we check on the Enclosure. On Tuesday, September 17, 2019, pratikmehta003

Hi.. As additional i am pasting the screen shot from Database and SWSQL : SQL Management Studio In SWSQL, shown as below: The Status i require is the one we get from the SQL Management Studio.

Hii I could add the below message in Alerts: I would like to add the below: a) Blade Name b) Slot c) Status as Text not as integers. The same field if i view from SQL Management Studio will show as failed.

Also please find the below snmp walk: .1.3.6.1.4.1.9.9.831.0.10.1.0 = STRING: "Utility failure messages are not persisted." .1.3.6.1.4.1.9.10.2.1.1.1.0 = GAUGE32: 0 .1.3.6.1.4.1.9.10.62.1.1.1.0 = INTEGER: 2 .1.3.6.1.4.1.9.10.62.1.1.2.0 = INTEGER: 1 .1.3.6.1.4.1.9.10.62.1.1.3.0 = INTEGER: 10 .1.3.6.1.4.1.9.10.62.1.1.4.0 =…

Hii Thank you it worked. Just one more help. Can we add in the alert email a variable obtained from a different poller for the same node. On Monday, September 16, 2019, i_like_eggs

Hii, We have changed the MIB to CISCO-ENVMON-MIB and still the issue persisit. I am unable to paste the SNMP Walk as file size is 8MB. Also note that while the PSU was down, the status is still shown as UP in the SolarWinds Console.

Hii, Thank you this worked. In latest version of NPM, there is already a custom property of Latitude and Longitude for World Maps which were hidden in my case.

Hii My configuration as below: It didint worked out

@"christopher.t.jones123" Report of Hardware Sensors for today which is wrong...

Sorry... I forgot to ask one more thing.. @"cnorborg" Our scenario is we are having a 100 remote sites and a hq connected through vsat links. We are planning to monitor Netflow at both end. In this case case, can we know your suggestions...

Dear Craig, Thank you for your response. I will explain the scenario as under: a) I have around 2000 Network Devices b) Each Device is having a Custom Property " AREA" c) The requirement is need to get the Availability of Last 7 Days in a Pie Chart d) This has either to be incorporated in a View or a Report Looking forward…

Hi Christopher, I thnk when PSU is removed, the SolarWinds is taking as Power Capacity changed: I am unable to see the hardware sensor history details. Just only current values are shown. 

Thank you so much... This worked.....

Thank you for your answer. It would be appreciable if any one could help us in this.

Hii Thank you for your suggestion and it worked. However, we are having around 650 Groups. We need to manually put the Credentials so or will it take from the Custom Property for Groups (Lattitude & Longitude).

Hi, Thank you for your response. Just one quick query. In the Hardware pre-requisites for the Mobile Admin, its asking for Server 2012 R2. Whether this will work in Server 2016 Standard. Also do we need a seperate DB for Mobile Admin. Best Regards, Geo John

Hii. Thank you. My device is a HP C7000 Enclosure. I am getting the status of each Blade on a Table. I need to create an alert if any of the below Blade is Down. So if any Blade is down, i should be able to tell that its failed. Best Regards,

Hii, Thank you for your reply. My query is as below: 1. I have an user named noc. 2. This same user is being used by 40 people Under the above scenario, what would be your reccomendation. Is it same effect as having 40 multiple accounts. On Tuesday, October 15, 2019, i_like_eggs

On Tuesday, October 15, 2019, i_like_eggs