cereal83

 Thanks, I will look into this as I was having a similar issue

Thank you. I have installed SP3 and everything seems to be working without issue

Wow thanks for the reply. Thats exactly what I was talking about and I can see it now as I wanted to before I asked the question. Thanks alot for your help.

I don't see it in my customer portal. Is there a delay or something?

I see that error every time I run the configuration manager. I have just learned to ignore it.

Yes I see that but then when I go back to the monitor and edit what to show, I can show the 3 new "groups" but not as I imagined. I didn't have much time yesterday, today I will play some more with it and see where it takes me. Thanks for your help

Hello GaryP and thanks for the update. I have recently purchased the software and installed 9.5 and I have noticed the new scanner and it does work wonderfully so far. Only issue I see is I can no longer use seed files and it is webbases and with different ip ranges, this is a very tedious task. I will open a ticket for…

I notice this too. I just added 850 devices yesterday and the service can't stop start on its own anymore.

Thanks again!

Hey and thanks for the reply. We also use websense for internet useage but I also believe some other products from Juniper. I am not too sure what else. A co-worker asked that I look into this and see if Orion supported SIEM's. As for just using TRAP, yeah that could be the only thing we use it for but I don't see the…

Thanks for your help guys!

Could it be a duplicate ip address somewhere on the network?

Thanks. I didn't see that online tutorial section but I was able to find out what I needed to know and I was able to add it to the web interface but now when I click on it, I get an error --- Orion Website Error An error has occurred with the Orion website. Additional Information System.ArgumentOutOfRangeException: Year,…

I am not really trying to get it like CW, just trying to make it work the same way. We have over 200 locations with devices and I need to group them according to their location as well as what part of the company they are related to. I have figured it out. Like now, I can see all the devices located in the north or south,…

Hello, Sorry I forgot to check back here but I found out the issue was some add-on installed for iis that changed the default settings of iis. This was uninstalled and it started to work and yes I am using an evaluation version. It is all working now. Thanks

Hello and thanks for a reply. I took some screenshots so hopefully this will help you out a bit. 1st image: http://img.photobucket.com/albums/v652/mypersonalpics/solarwinds/2ea412ef.jpg You can see which custom pollers I am talking about the cdp one. I see only Poller name, then current status is 7 value and when I click…

Great thanks. I will let the DBA know. Thanks again

Hi, there is a qos policy except its not for the uplink to the telco but rather on the uplink to the other switches. I do have the netflow module yet the 3560 switches do not support netflow as far as I know.

Hey, Thanks for the reply. This is what I was looking for as I found to interfaces that no longer exist and was able to delete them. I was trying to do it in system manager on the server but I guess everything is moving to a web based version. Thanks again!

Hi Jason, Yes I also searched through the administrator guide and not finding anything I decided to ask here. Hopefully they come up with an answer quickly. Thanks

Nothing happens, the old name stays the same and I have to manually update it. I have left devices over a few days period to see if it changes and nothing.

I have 2557 network elements. I am also using Orion 9.5 with SP5 but this issue has been here since before sp5 and not saying its a service pack issue. Thanks

Davbyrd, I am using SolarWinds Orion Network Performance Monitor 9.1 SP4. I have also tried changing the subnet so like 255.255.255.0 or 255.255.255.128 (yes i know how subnets work) with no more luck. If the range gets scanned and then I do a re-scan, it will never pick up that node so I have to add it manually. GaryP,…

Hemitruck, the switches aren't too busy that they are not responding. I am doing it after hours usually when the switch useage is very low. ichance, I have doubled those numbers in the settings for snmp and still same issue. It seems the only way to add new devices that this scanner misses is by system manager which is a…

Thanks. I will look into each way but changing the snmp info on over 1500 devices for evaluation purposes is sort of alot of work. The video helped alot. I have created 3 new properties now and now I am trying to figure out how to add the proper device to the proper property!

Thanks, I have emailed the guy and hopefully he can help, if not I will open a support ticket

Hi all and thanks for the quick replies. I have done what borgan has suggested and it has seemed to worked exactly how I wanted it to. Thanks for providing a screenshot as well. I knew how to create the alert but didn't realize how to add the devices to the specific alert but now I know! Thanks

Yes I manually stopped all the services as the netpermon services has a hard time stopping and re-ran the configuration. I still got 2 errors but now it is working. Thanks

So I have redid the rules. Is http://img.photobucket.com/albums/v652/mypersonalpics/solarwinds/71fc6286.jpg the proper way now? So there is no for the downed interfaces not to be reported into the events? We usually use events for seeing what is going down but I had to add monitoring to about 1300 interfaces to see how…

Yeah I did that last night but I guess it didn't take effect until the server was rebooted just a few minutes ago due to Windows Update. Thanks as all seems to be gone now.