blkchampion

Comments

  • Go to appliance --> checklogs and see which folder the logs are going to. Then go into the web appliance and go to Manage --> Appliances --> Connectors. See if there are Tofino Firewalls. Go to that connector and click on the gear and select new. Then configure the folder within the connector to the file location that the…
    in Configure LEM as a SYSLOG Server Comment by blkchampion March 2014
  • Did you go into the console and enable the flow? It should be under the manager --> enableflow. 
    in Configure LEM as a SYSLOG Server Comment by blkchampion March 2014
  • Ok. when I click on % Percent utilization in the demo I get this chart The problem is that when I look at our devices, its running between 99.995 and 99.996% all the time. this is incorrect because I'm looking at the chart within our EMC console. Now I was told that this should be fixed in 5.7.2 which I upgraded to about…
    in Monitor storage processor on EMC VNX Comment by blkchampion September 2014
  • Try this in the filter Nodes.Caption like '%SQL%' and Volumes.Caption not Like '%C:\*%' it should work. 
    in Filter SQL Servers based on volume letter Comment by blkchampion July 2017
  • You would have to filter on the Volumes.Caption field and you would have to do a join between the Nodes table and the volumes table. Something like this. Select Volumes.Caption, Nodes.Caption From Nodes Join Volumes on Nodes.NodeID = Volumes.NodeID where Nodes.Caption like '%SQL%' and Volumes.Caption not Like '%C:\*%' Hope…
    in Filter SQL Servers based on volume letter Comment by blkchampion July 2017
  • Follow these steps to move Solarwinds Orion to the new application server. 1. Deactivate all the solarwinds licenses from the solarwinds license manager. 2. Download the installer versions of your Orion modules that you currently have (Orion Core 2012.2.0, NCM 7.1.1, NPM 10.4, IVIM 1.5.0) 3. Activate all your licenses on…
    in Migrate Orion Server Comment by blkchampion March 2014
  • I had a major issue doing this and I spent the next 18 hours fixing it. 10 of that spent with Solarwinds support. It crashed in the middle of updating the schema. 
    in Any issues going from NPM version 11.0.1 directly to the new 11.5 RC? Comment by blkchampion January 2015
  • Yes, we have done that here. We would set SNMP traps to be created in SolarWinds when alerts would occur. Those SNMP traps would be picked up in Spectrum and would create alerts. 
    in SolarWinds and CA Spectrum Comment by blkchampion August 2016
  • Go to Settings -> NCM Settings -> Real-Time Change detection Setup. Once you are there follow the steps. Here is the links for the SNMP trap configuration & syslog configuration Traps - http://www.solarwinds.com/NetPerfMon/SolarWinds/wwhelp/wwhimpl/js/html/wwhelp.htm#href=OrionNCMPHRTCDDeviceConfigLearnMo… Syslog -…
    in How to Configure real time notification in NCM of orion Comment by blkchampion May 2014
  • If those conditions don't give you every thing you are looking for, then you could try this one. Lester Grant Loop 1 Systems loop1systems.com
    in LEM Report/Alert for Cisco ASA VPN Usage Comment by blkchampion March 2014
  • You could create your alert like this. VolumeType = Fixed Disk AND VolumeSpaceAvailable < 1073741824 You do have to setup the actual space in bytes just as aLTeReGo posted. Hope this helps. Lester Grant Loop1Systems www.loop1systems.com
    in Low Disk Space Alert on Volume Space Available Comment by blkchampion March 2014
Avatar