amstephen87

I had the same issue and after many weeks working with support and Devs they finally got a work around look below. DISCLAIMER (I don't know if they have a KB and I do not warrant or assume any risk as this is not an official release or my own, but only that it seemed to work for me. I do not take responsibility for any…

Grimey, Can you provide me with more info on what steps you have taken and if you have a screen shot of the error SW produces when you try to add the device? Kind Regards, -Adam Stephen Loop1 Systems: SolarWinds Training and Professional Services * LinkedIN: Loop1 Systems * Facebook: Loop1 Systems * Twitter: @Loop1Systems

Andrew, NCM does support a whole second set with use name and password but the enable password could be entered afterwards to the primary login as you have noticed. Is it something where you might have the user from tacacs by pass the need for a second username and only use an enable password?

Andrew, Have you created a separate connect profile to separate the enable if it is need. Also if tacacs is working does it bypass the enable when tacacs works? Regards, amstephen87

What events are you looking to track?

You may be able to use the package boot actions to implement a silent license input. Does WinZip provide a silent registration license validation? If so what is their process. Once you would know that please get to me and I could instruct further.

You have to use exclusions in the NCM settings so you can ignore those in configs. TYhe regex is entered in the NCM settings under comparison criteria. The exact strings are ^! Command and then on for ^! Time and you will add them as new entries. You can name them with what ever alias you want. These two regex ignore the…

Sure can do might take a bit of comments back an forth. First thing If you look on the node details of that device does it give the system OID. I woudl use that to look into the snmp mib in the Universal Device Poller App on the primary SolarWInds poller. I would then browse and see if I can find the OIDs that mighgt be…

Do you have the undp setup already? If not do you know the general oid for the device?? Regards, amstephen87

Bret, I am guessing here based on your desc but it sounds like oyu have both a ro and rw specified in your node details is this correct if so you can only have one populated so use the RW if it is to be a gateway and try again. If this is not the case it is possible that is something else so we can discuss that once we get…

MRK, Yes you can there is a flag that allows duplicate IP Addresses in the settings. See below.

Pufferdude, I would suggest that you verify your interface for configured speed. You can check if the interface is set to the proper speed. Secondly does the Sonicwall have settings on how to delay or wait for a certain time before exporting flows. Do you have a sample of this is configured? Regards, -Adam Stephen Loop1…

Mr Error, I will second the post above regarding using the policy tool in NCM. You can create different rules for each subnet and helper address. Create a policy that would be used for each subset of devices you need to change and apply those polices to one report that will show the result in one pane of glass. The…

Try to logon to you customer portal and look under downloads of the SRM part of you license and choose the download you need. Have you tried this?

W90l, To connect a shared network drive you would need to attach the network drive to the SolarWinds server or target SolarWinds poller machine you would like to store the config archive on. You then provide the location to SolarWinds as it can see drive letters. Hope this helps. Best, -Adam Stephen Loop1 Systems:…

Todd, Do you need the hyper link to include a piece of the URL the somehow references the node in another software or is the the hyper link to just to another site? Regards, -Adam Stephen Loop1 Systems: SolarWinds Training and Professional Services * LinkedIN: Loop1 Systems * Facebook: Loop1 Systems * Twitter: @Loop1Systems

Sotherls, I agree with you this an annoyance. I would suggest you can inspect the html and copy and past the portion that contains the form field of the report but that is complicated and may not always work. I generated a feature request to be voted on in order to add this feature. Feel free to vote yes or no. Click this…

Jwilling, Is this a new install or upgrade? One thought is that when the configuration wizard ran it did not have elevated Admin privileges. You can give the configuration wizard elevated privileges by finding it in Start -> Programs/SolarWindsOrion/ConfigurationAuto-Deiscovery/Configuration Wizard Right click on…