acf6276

I just checked my weekly inventory report and my 9300 switches are displaying all information for each stack ( SN, part number, etc). I just use the built in Cisco Full Inventory report. I can't recall if we had to tweak anything else in this report though. I know in an older NPM version it did have issues with pulling…

It's probably polling incorrect data. After I upgraded to 2020.2.x I had to go back and fix reports as it was trying to pull something that didn't exist. I can't recall what fixed my issue but I know I had to go back and adjust some parameters. Make sure to go through the schedule as well as the report to ensure there is…

Dgtracy is this through interface monitoring on NPM or netflow? Are you sure its not doing asymmetric routing?

I've never gotten an offline installer to actually run correctly.

What does this database error do to the server?

I ended up opening a case on March 31st since I never heard from anyone else on the forums. The case still has not been picked up. Case #00777095 a

Thanks for the reply Jason. Yes I reviewed that documentation once we upgraded to a version of SolarWinds that supported the rest api. I have not opened a case with SolarWinds support as I generally do not have much luck with cases when it comes to devices having issues with SNMP as it generally becomes a finger pointing…

I had the same issue when trying to install HF1 Monday morning. I have yet to have any tech take my high and critical tickets from that day. You can not reach anyone on the phone and the phone que hangs up automatically after 1 hour; using the call back feature results in no call backs. Solarwinds support has gone down…

I have been trying to do this with cisco 3850's running 16.9.x and cisco 9300's running 16.12.x. From my understanding of the documentation is that i can re-use my existing flows by adding that option which it does not exist in this code level. I use the cisco DNA center appliance for my newer switches and it pushes out a…

For some reason I wasn't getting notifications I had replies on my threads. I submitted a case last week and the diagnostics were submitted to the engineering team.

Couple of things I noticed that you should enable if the code is a couple of years old. in your exporter specify the protocol with this command export-protocol netflow-v9 on your interfaces you are monitoring with you netflow you need to specify input and output that references your flow monitor you set up. example:…

This is a bug that has been identified in the latest release of NTA 2020.2.1 Solarwinds support applied a custom fix (buddy drop) to resolve the issue. 

UDT is not real time and it probably had not done a new poll yet. If you had forced it to re-poll it would have most likely showed that port down.

Have you tried pulling the report from NPM and viewing it to see if its blank in there? You could try and re-create the report if it broke during a recent upgrade or some of the parameters may no longer be valid.

I do have a question about doing this another way but want to say First off this is a fantastic document and guide! Could you also do this under Manage applications and Service ports by specifying the ports for Microsoft teams/skype with a destination IP address as any or would that start classifying web surfing as teams…

You need to create 2 flow monitors for 9K line before applying to the interfaces you want to monitor. You just need to duplicate your first record but reference the opposite.

What IOS version are you running on your ISR?

Thanks for sharing, not sure why people are saying this is normal and is just a coincidence. I'm sure they were well aware of the issue prior to releasing information to the public. I mean come on have you ever seen Solarwinds release a patch in 1 day????? Heck it takes longer than that to reach support to resolve an…

You would be impacted as you are not running HF2 on that version. HF2 addresses the largest compromised parts. Out of curiosity why do you want to check the previous version you had installed prior to HF1? 

Hello, Does anyone else have issues with this classifying the traffic as teams on the ingress path? Not quite sure why I would need to specify my internal IP's on the teams IP group as the incoming traffic is from the same IP server range and from my understanding should classify both ingress and egress traffic if its…

Do we know when this may be available? Seems like a pretty big miss on Solarwinds Part not to integrate an existing feature into the new feature.

Any idea when it will be added?

ALTeRego any update on CORE-11585? Looking specifically for the Cisco 5520 WLC that was listed on page 3 of this. Thanks!

Any resolution to this? 

Swprojpw You need to login to your solarwinds account and go to the download section for NPM and it will be listed under the Install Type.

The release is still fresh and people may not be posting and the fix they mentioned to me may be the work around they are using on others. When their staff tells me they are getting a lot of calls about complaints and issues that's when I state there is an issue. Their manager also emailed me apologizing for the response…

Yes. There are issues with the engine (NPM) with this code version. Apparently there is a work around where they can delete some files from the database. Come to find out our server wasn't even working after the upgrade, alerts weren't being triggered and data was not being polled. We ended up rolling back and it took me…

Were you able to figure it out? If so would you mind sharing? 

unfortunately its not that issue. It actually stops polling all environmental sensors or random ones. 3850's use sysobjectid 1.3.6.1.4.1.9.1.1745 When we do a SNMP walk of a 3.6.8 version compared to a 16.12.3a version we see these missing: Cisco cefcFanTrayOperStatus 1.3.6.1.4.1.9.9.117.1.4.1.1.1 Cisco…

Any figure out this issue yet?