Prineel ✭✭✭✭✭

Thanks @"stevenstadel"

Thanks for this! Changed it slightly to view SFP Data SELECT FullyQualifiedName, DisplayName, Value, Status, OriginalStatus, StatusDescription FROM Orion.HardwareHealth.HardwareItem WHERE HardwareCategoryID = 1 AND DisplayName like '%dbm%'

@"KMSigma.SWI" can you please assist with SWQL behind these KPI widgets?

Thanks Kevin, will test shortly!

Also get an HTTP request error when trying to simulate. Anyone manage to get this working recently? Thanks

Have the following config but not receiving any flows in NTA. #huawei ip 192.168.x.x #solar winds 10.71.x.x 2055 [Huawei] ip netstream timeout active 1 [Huawei] ip netstream timeout inactive 10 [Huawei] ip netstream export source 192.168.x.x [Huawei] ip netstream export host 10.71.x.x 2055 [Huawei] ip netstream version 9…

Thanks makes sense now! Will edit Hardware Warning/Critical Alert and go from there.

Hi Christopher, thanks for your response. Apologies can you clarify regarding SolarWinds using the right columns as thresholds? Thanks

Have a similar request currently, anyone able to make any progress on this? Thanks

Thanks @"marlief22" That helps, have managed to edit for Last24 hours availability on a specific Node SELECT round (AVG(Availability),2) AS AVGAvailability, NodeID FROM Orion.ResponseTime Where DateTime >= AddHour(-24, GETDATE()) AND NodeID IN (SELECT NodeID from Orion.Nodes WHERE NodeName = 'Server1') GROUP BY NodeID…

Hi, anyone managed to do this? Thanks

Hi, have the same requirement, did you manage to get the report?

@"christopher.t.jones123" works great thanks!

Hi Christopher, thanks for your response, sorry not exactly sure how to do that...

Hi, hope you can assist. Trying to monitor these OID's but get OID not supported. 1.3.6.1.4.1.41916.6.1.1.1.8 bfdSessionsListLocalColor 1.3.6.1.4.1.41916.6.1.1.1.10 bfdSessionsListState Running the following IOS Cisco IOS XE Software, Version 17.03.02 Cisco IOS Software [Amsterdam], ISR Software…

Just some feedback, recently completed this "lift and shift" migration to Azure. Was fairly straight forward thankfully Mgrate VM's to Azure>Run Config Wizard on Main Poller>Run Config Wizard on Standby>Run Config Wizard on AWS Migrated a DPA Server as well, just needed to change the repo.properties file with the new IP…

Thanks, yes have copied to another location.

Same question, any response? Thanks

Hi, also interested if there has been any progress on this? Thanks

Hi, were you able to make any progress on this? Thanks

Hi, any resolution to this problem? Thanks

The above results is from INST2 which is currently active. Do i need to run script against INST1 when available?

Hi, would this indicate permission issue on DB or server security?

I get the following

Thanks, do we change the values in brackets. Still using defaults like SolarWindsOrionDatabaseUser and SolarWindsNtaDatabaseUser

Thanks, basically im trying to trigger an alert if Deadlocks per/sec goes over a certain value. Not sure if the below is correct? Does the critical value need to be set in the template?

Hi there, sorry not sure this was performed by the internal server team.

Edited the script and Passed validation, have asked Engineer to test. /* .CHANGE_TEMPLATE_DESCRIPTION Change Access List on Cisco IOS devices .CHANGE_TEMPLATE_TAGS Cisco .PLATFORM_DESCRIPTION Cisco IOS .PARAMETER_LABEL @ContextNode NCM Node .PARAMETER_DESCRIPTION @ContextNode The node the template will operate on. All…

Have some feedback from DBA. Anything else to lookout for? Solarwinds primary instance Name :- MCPD1VSQP021\INST2 Solarwinds Secondary instance Name :- MCPD1VSQP020\INST1 Listeners Name :- AG03SQLLis Primary Secondary