GoldTipu ✭✭✭✭✭

First upgrade Orion 10.1.2 . If you dont have Engineer Toolset you can download and monitor the RealTime interface Status. & Run a MIB walk in order to get the OID and value been returned by target device. http://www.solarwinds.com/products/toolsets/ You can create UDP for an interface statistic returned by device.…

I would first recommend you to upgrade Orion NPM 10.1.2 - If you have SolarWinds Engineer Toolset run a MIB walk and see what value and OID been returned by target device. Also you can use RealTime interface monitor in SolarWinds Engineer Toolset. You can install 14 days trial . http://www.solarwinds.com/products/toolsets/…

Orion Collect the device Machine Type is from * 1.3.6.1.2.1.1.2 - sysObjectID The provided SysObject OID value from the device is just telling the Orion its a Cisco device but no further details provided by the device 1.3.6.1.4.1.9.1.2114 therefor Orion marked the device as Cisco only . Question : Where is the correct…

knowledgebase.solarwinds.com/.../How to monitor a process on a UNIX-based system.

What version of Orion NPM you have ? If you are not on the NPM 11.5 i would advise you to upgrade in order to avoid such errors . For more info see tke KB post below. SolarWinds Knowledge Base :: I am seeing an Error 500 in the Configuration Wizard. If you have configured HTTPS redirection use the below post to correct it…

Your work around is Report there is no historical chart available . Or Events go to Events Event Type, select Interface down, then select the date range You would need to run twice, once for up, then for down Export it to PDF to see the results as report .

There is no such guide actually the installation is very simple . You just need to uninstall everything for SolarWinds from (Add / Remove ) program and re install and change the path to D drive as required. - If you have custom reports you can copy to the report folder to the D drive report folder . - You do not need to…

Hello This issue has nothing to do with the Orion MIB Database . Have you tried the different SNMP Get types ? Can you please pass me the actual screen shot and SNMPWALK from the device so i can see which OID is been rejected in this way using SNMPWALK i can check the tables and confirm where is the actual root cause of…

I am new to installing Orion Solarwinds and have been reading the admin guide. It say's that NPM is not 64 bit ready yet? Is this still the case or is the documentation out of date? A- You can install Orion NPM on 64 bit O/S however you need to run IIS in 32 bit mode. I also noticed that Orion does not support and advise…

Create a post titled “FEATURE REQUEST - Name of the Feature Request” and detail your request including case number. These forums are monitored by our Product Managers. This will allow other customers to voice their opinions as to whether they would find the feature useful. You may find "What we are working on" interesting:…

If you are looking for Windows Log Forwarder (Click To Download ) Log Forwarder for Windows

Lots of new type of polling is been introduced within this latest release / (Routing & Topology Polling could cause such issues ) IF you have very low spec VM / or System If you will have following MIN spec you will have no such issue and system work normally . The following is a SAMPLE MINIMUM recommendation so you can…

If you are running SQL Server express 2005 check the size of the DB if its more then 4 Gb it will be locked so you will need to free up some space. Follow the steps to release space from DB. Take full backup before your run following steps. Open Database Manager Start > All Programs > Solarwinds Orion > Advanced Features >…

Bay Networks was acquired by Canadian company Nortel in 1998 to form Nortel Networks, and then in September 2009, Avaya purchased the Nortel Enterprise division, which included some former Bay Networks product lines . From Synoptics to Bay to Nortel to Avaya You can run a MIB Walk to get the OID from the device to verify…

Can you please post any error in OrionDiscveryJob.log in 2003 its there C:\Documents and settings\All Users\Application Data\Solarwinds\Discovery Engine this will gives you the break down of Network discovery . 

Have you created a UDP ? - what value is returned in UDP ? - What method you have in UDP for SNMP ? Get / Get Next ? - What Orion Version you have ? 

I think in the UNDP you are using the option to keep Historical data therefor its using the older previously stored value . I would suggest instead of creating the (Table Poller) create individual Poller for OID and then do not use the option to Keep Historical Data . in Version 12 its built in

This will work with the latest versions of installation go ahead. SOLARWINDS PRODUCT UPGRADE ADVISOR https://customerportal.solarwinds.com/support/product-upgrade-advisor COMPATIBILITY OF SOLARWINDS ORION PRODUCTS FOR INSTALLATION AND UPGRADE…

Have you checked the full post below ? When you say "That server is not being monitored specifically by NPM " do you mean the server is not been added as node in the Orion and you are still sending the Traps ? Bad trap packet received from Node with IP XX.XX.XX.XX. Error description : Unknown user and engine. Packet…

If you have both Orion and Database in same time zone you dont require any change in NPM . 

Updating the correct KB link https://support.solarwinds.com/Success_Center/Server_Application_Monitor_(SAM)/Hardware_alert_variables_returning_incorrect_data

May be useful for you to see Nested Maps here. http://www.solarwinds.com/support/orion/docs/OrionNetworkAtlasAdminGuide.pdf

Windows 2008 Server is shipped with this miniport driver as well. This is required in case of secure VPN tunnel connections. it offers tunelling PPP traffic over a secured SSL channel. Therefore, it increases security due to encryption and traffic integrity checking. A Miniport driver is a hardware-specific driver that…

Try to check the standard OID first below post * What CPU and memory utilization object IDs (OIDs) does Orion NPM poll? Multiple CPU Count & Each Load on CPU for the Node Related Articles. * What object IDs (OIDs) does Orion NPM poll for volume information? What types of volume information does Orion NPM poll? * What CPU…

The UCS does not provide blade's IP addresses, so we are not able to map blades to nodes. Only fabrics sys/switch-A and sys/switch-B have defined extIP. All blades have extIP="0.0.0.0" You must need to configure UCS to provide extIP for blades. Only then the status in Orion will be available . Please run this tool - it…

Use the Variable called ${N=OrionGroup;M=GroupStatusRootCause}

I know we can do that if you have SAM (Server Application Monitor ) Module installed to Monitor the Age Advanced File Age Monitor with PowerShell How to read log files Other then that . This is feature request to our development team. The team will consider the request, and decide whether it will be implemented. With…

Few weeks back i have a customer with same issue , I am not sure if you have the same exact issue however i am adding the findings below. We tried few changes however, responses from that server was very larger than usual and split into smaller chunks. And our Tomcat monitor is currently unable to handle such responses. We…

For say you have setup 300 sec interval for each polling cycle in APM for that application . you click Poll Now. It will put your poll now request in Q immediately without waiting for that 300 sec polling interval . However it will not prioritization your poll now request in Q . You still have to wait to get that request…

Make sure you are not polling more then 8000 Elements (Elements = Nodes/ Volumes + Interfaces ) on each poller . Make sure you are using the VM / System have 3GHz / Or more power to contain the polling cycle . The following is a SAMPLE recommendation (Minimum) so you can add or subtract these according to your own needs.…