FormerMember ✭✭✭

In the next version, there's going to be a feature that allows you to "unmanage" an application.

Adding web-based administration is a top priority. It will take a couple of smaller releases because we need to make some back-end changes to make this possible. But it's coming... Denny LeCompte Sr. Product Manager, Orion SolarWinds

Disk full would be my guess as well. It doesn't like that at all.

I did have a problem with this (8000+ elements on one server) but it all but went away after running the polls per second tuning utility. Doug

This feature was added in 8.5. You can find the how-to steps in the Admin Guide: www.solarwinds.com/.../wwhelp.htm

Hi wluther​ as mentioned. below is the code that i would like to use but it is not pulling in the data. SELECT T1.NodeID, T1.Caption, n.n_site, n.Vendor, n.Description, COUNT (*) AS "Total Ports", SUM (IsUp) AS "Used Ports", SUM (IsDown) AS "Available Ports", CAST (ROUND ((1.0 * SUM (IsDown)/COUNT (*)) *100, 0) as float)…

It seems Solarwinds has limited reporting on Cisco wireless from what I can tell. I have Cisco Meraki MR24 APs and all I can view is the connected interface and not much else. I use the web tools for any sort of wireless usage monitoring. Good luck!

Cisco NM-1T3/E3 EOL: October 11, 2013 EOS: April 11, 2014 End-of-Sale and End-of-Life Announcement for the Cisco T3/E3 Network Module [Cisco 3900 Series Integrated Services Routers] - Cisco Systems

Hi, Not sure if you still require this (I know it's been 5yrs) but may help other users as I came across this post looking for the same thing. Anyway, I worked out how to do this via a custom table. I am reporting on all nodes (no further criteria). Now edit your table layout. - Add Node Name (Nodes > Node Name). - Add…

nDepth has limitations for data older than a month also, per this article: No nDepth results older than a month - SolarWinds Worldwide, LLC. Help and Support

This was where I had a hard time also! A great LEM tech taught me how to go into nDepth and click Event Groups in the 2nd column of the screen, then click on the Any Alert Event Grop, then below that you'll see the Events/Fields that are common to all groups. Usually you will want to click and drag the "DetectionIP" event…

I'm also new to LEM but I'm starting to find may around nDepth pretty good now for ad hoc reports. I can't give you specifics because we don't have an ASA, but I can give you a start in finding what you need. In the upper left hand corner of nDepth move to slider to the A, which is text mode. In the search line enter the…

How about this.. A place to put notes on a node.. a interface.. an application service a whatever. Not all objects need comments.. but there are always those one offs that would benefit from having special instructions.. support contact info.. notes? just a thought :)

unfortunately the only feature i would like to see in APM in the next release, is for the ability to be able to select if you to collect any performance stats or not on a process, of if you ONLY want to know if a process is running one or more times... if i can not get this feature, then APM is unfortunately going to need…

 I think you can do what you want using custom properties.

OK - I manged to import our IP address design into IPAM. Unfortunately none of the subnets are populated with IP addresses so the system won't scan to go out and see what is out there (actually it is scanning - one subnet has been under scan for 135 minutes! ... but that's another story). Anyway since there are no IP…

Hi vicky.yeung​, Have you checked this page already: SolarWinds Contact Us ?

bump...anyone able to help with a query? I can't get one to work.

What does you management think of using the Percentage Utilization instead? Solves the issue and gives better perspective on usage. 

Its very strange that you are not able to search for subnets directly. I think it's very broken not to have that functionality, getting pages on pages of single IP addresses is just frustrating. Could it be that hard to implement? Just another search field option in the search function. big love to SW if they fix this asap

This feature was introduced as part of NetFlow Traffic Analyzer. We were not able to retrofit the feature for all of the Orion 8.0 views, but if we hear more positive comments regarding the NTA feature, we will consider adding it to Orion NPM. Denny LeCompte Sr. Product Manager, Orion SolarWinds

We haven't upgraded our hosts to 5.0 yet, but our vCenter has been upped from 5 to 5.1 and don't have any connectivity issues.

It's something we're considering for a future release.

How do I start? I try running some examples and I get warnings "mismatched input 'swis' expecting 'Select'". Is there a step through where I could see the order of things? I see examples of different scripts, but do I call them from SWQL Studio? Nothing I've tried has been successful.

Hi mate... i woudl suggest that you start using custom properties. go into system maanger and fire up custom property editor. add a new text property called "support_group" to the nodes table, and populate the property witht he team name who supports it (i.e. EUROPE or INDIA) in you alert trigger definition, set one to…

Where would you like to report this information? Being able to submit this information via the NCM interface in an semi-automated fashion would be very nice. We have many Cisco ASA's and it seems to only be reporting suggested dates for other Cisco devices (2 Catalyst switches and a NAS device), for these devices the…

I'm for this...I would like to be able to do this too.

Have a look here... it does actually say management via SNMP v1. I guess they don't realise how insecure that is... https://www.zsis.hr/UserDocsImages/Sigurnost/pdfs/KG-175.pdf

Surely a device like this doesn't require monitoring, with it being ruggedized, tamperproof and high security. On second thoughts try "public" for the public snmp string.

windows has issues with the virtualized interfaces in that every reboot will give it a new ID so if you click on list resources and see the same interfaces in there again just not checked for monitoring you can bring them in but this will happen everytime the server is rebooted. the ones that dont change are the physical…