Universal Device Poller - Invalid OID HUAWEI

Question

Hi Everyone,

I try to create a new Universal Device Poller (UnDP) but after define the OID and click, a PopUP Message appears with the following text "Invalid OID". The OID that i use is

OID: 1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.6

On my MIB Tree on UnDP i just can see until 1.3.6.1.4.1.2011.6

I use NPM 10.5 and CORE 2013.1.0

This is an SNMP Walk example output...

********************************************************

.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.4 = INTEGER: 1

.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.5 = INTEGER: 1

.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.6 = INTEGER: 1

.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.7 = INTEGER: 2

.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15.4194336768.9 = INTEGER: 1

*********************************************************

I found a similar Thwack Post Universal Device Poller - Invalid OID

Someone with similar case?
Any kind of help will be appreciated

Regards,

Tavo

tavo.villanueva · Accepted Answer

Ok, I found the response myself.

The Universal Device Poller aplication have an issue when try to validate any number on the differents subtrees on the OID and the validation is that you can have unitl 128 subtrees on OID and any subtree number can exced a number of 2^31, when in the RFC Standard for SNMP defines a number of 2^32-1... Bat maths for Solarwinds Engineers that develop this apllication.

www.math.utah.edu/online/1010/precedence/

Universal Device Poller - Invalid OID HUAWEI

Top Replies