15 Replies Latest reply on Dec 5, 2017 12:06 PM by michael.alvarez

    Error adding ISC DHCP Server to IPAM

    velandia.andres

      When adding my ISC DHCP Server to IPAM in order to test this Solarwinds' Software, I receive the following error:

       

      Test Failed. More than one script file path found.

       

      This happens when testing the credentials for accessing the server.

       

      Any hints as to what is happening will be appreciated.

       

      IPAM version: 4.3

      ISC DHCP version: 4.2.5

      OS: Linux centos 7

        • Re: Error adding ISC DHCP Server to IPAM
          muralikvp

          This below link is having pre request for setting up the ISC dhcp server

          http://knowledgebase.solarwinds.com/kb/questions/5196/ISC+DHCP+Minimum+Requirements

           

          We need IPAM business layer log in debug mode.Go to Log adjuster then adjust debug mode for following areas

          1. IP Address Manager

          Test the Isc DHCP server once again and sent out logs which will be usually located in C:\programdata\Solarwinds\Logs\IPAM

          1 of 1 people found this helpful
            • Re: Error adding ISC DHCP Server to IPAM
              velandia.andres

              Thank you for your reply.

              I have been looking for a way to send you the output of the log file as suggested, but there is not an option to attach a file. I am very sorry for pasting the long text that follows:

              2015-06-24 09:53:06,694 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [IscDhcpVersionInfoA]...

              2015-06-24 09:53:06,701 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['dhcpd --version']...

              2015-06-24 09:53:06,704 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:06,705 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:06,706 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:06,706 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending:

              2015-06-24 09:53:06,708 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data:

              [root@localhost ~]#

              2015-06-24 09:53:06,723 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: dhcpd --version

              2015-06-24 09:53:06,724 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: dhcpd --version

              2015-06-24 09:53:06,744 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: isc-dhcpd-4.2.5

              2015-06-24 09:53:06,746 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

              2015-06-24 09:53:06,749 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:06,750 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd0,Command='dhcpd --version']

              isc-dhcpd-4.2.5

              2015-06-24 09:53:06,751 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:06,751 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:06,752 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='dhcpd --version',WaitTime=00:00:00.0470564]

              isc-dhcpd-4.2.5

              2015-06-24 09:53:06,758 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseBindVersionInfoA, rule=ParseBindVersionInfoA]...

              2015-06-24 09:53:06,777 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseBindVersionInfoA] succeeded.

              2015-06-24 09:53:06,786 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [IscDhcpVersionInfoA] executed

              2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: IscDhcpVersionInfoA

              Command Text: dhcpd --version

              DefaultNextCommand Name: IscDhcpVersionInfoB

              Actions:

              Action Name: ParseBindVersionInfoA

              Next command name: Set:[ErrorCode]=0

              Rule:

                Rule Name: ParseBindVersionInfoA

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: [a-zA-Z-]+(?<IscDhcpVersionA>[\d.]+).*

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

              isc-dhcpd-4.2.5

               

               

              -- raw value end ------------------------------------------

              2015-06-24 09:53:06,793 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:06,796 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:06,798 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:06,798 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: FindEnviornmentPath

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:06,799 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindEnviornmentPath]...

              2015-06-24 09:53:06,799 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['echo $PATH_DHCPD_DB']...

              2015-06-24 09:53:06,800 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:06,800 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:06,801 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:06,801 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:06,802 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: echo $PATH_DHCPD_DB

               

               

              2015-06-24 09:53:06,804 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: echo $PATH_DHCPD_DB

               

               

              [root@localhost ~]#

              2015-06-24 09:53:06,804 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:06,805 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd1,Command='echo $PATH_DHCPD_DB']

               

               

              2015-06-24 09:53:06,805 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:06,806 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:06,806 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='echo $PATH_DHCPD_DB',WaitTime=00:00:00.0060380]

               

               

              2015-06-24 09:53:06,807 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseEnvironmentPath, rule=FindEnvironmentPath]...

              2015-06-24 09:53:06,810 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [FindEnvironmentPath] succeeded.

              2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindEnviornmentPath] executed

              2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: FindEnviornmentPath

              Command Text: echo $PATH_DHCPD_DB

              DefaultNextCommand Name: Set:[ErrorCode]=5000

              Actions:

              Action Name: ParseEnvironmentPath

              Next command name: Set:[ErrorCode]=0

              Rule:

                Rule Name: FindEnvironmentPath

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: ^\s*(?<Path>\w+)?\s*

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

              2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:06,811 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:06,813 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:06,813 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: FindDistributionInfo

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:06,814 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDistributionInfo]...

              2015-06-24 09:53:06,814 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['uname -mrs']...

              2015-06-24 09:53:06,815 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:06,815 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:06,816 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:06,816 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:06,817 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: uname -mrs

               

               

              2015-06-24 09:53:06,819 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: uname -mrs

               

               

              2015-06-24 09:53:06,820 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: Linux 3.10.0-123.el7.x86_64 x86_64

               

               

              2015-06-24 09:53:07,037 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

              2015-06-24 09:53:07,038 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,038 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd2,Command='uname -mrs']

              Linux 3.10.0-123.el7.x86_64 x86_64

               

               

              2015-06-24 09:53:07,039 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,039 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,040 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='uname -mrs',WaitTime=00:00:00.2244744]

              Linux 3.10.0-123.el7.x86_64 x86_64

               

               

              2015-06-24 09:53:07,040 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseDistributionName, rule=FindDistributionNameA]...

              2015-06-24 09:53:07,041 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [FindDistributionNameA] succeeded.

              2015-06-24 09:53:07,042 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDistributionInfo] executed

              2015-06-24 09:53:07,042 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,043 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: FindDistributionInfo

              Command Text: uname -mrs

              DefaultNextCommand Name: Set:[ErrorCode]=1001

              Actions:

              Action Name: ParseDistributionName

              Next command name: Set:[ErrorCode]=0

              Rule:

                Rule Name: FindDistributionNameA

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: ^(?<FullDistirbutionInfo>[\w\s.-]+)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

              Linux 3.10.0-123.el7.x86_64 x86_64

               

               

              -- raw value end ------------------------------------------

              2015-06-24 09:53:07,043 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,044 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: DhcpdProcessInfo

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:07,045 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [DhcpdProcessInfo]...

              2015-06-24 09:53:07,045 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['ps -w -A -o comm,pid,args | grep ^dhcpd -w']...

              2015-06-24 09:53:07,046 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,046 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,047 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,059 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,059 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: ps -w -A -o comm,pid,args | grep ^dhcpd -w

               

               

              2015-06-24 09:53:07,061 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: ps -w -A -o comm,pid,args | grep ^dhcpd -w

               

               

              2015-06-24 09:53:07,074 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

               

               

              2015-06-24 09:53:07,075 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [root@localhost ~]#

              2015-06-24 09:53:07,076 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,077 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd3,Command='ps -w -A -o comm,pid,args | grep ^dhcpd -w']

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

               

               

              2015-06-24 09:53:07,077 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,078 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,078 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='ps -w -A -o comm,pid,args | grep ^dhcpd -w',WaitTime=00:00:00.0319861]

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

               

               

              2015-06-24 09:53:07,079 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseIscDhcpProcessInfo, rule=ParseProcessInfo]...

              2015-06-24 09:53:07,080 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseProcessInfo] succeeded.

              2015-06-24 09:53:07,081 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [DhcpdProcessInfo] executed

              2015-06-24 09:53:07,081 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,082 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: DhcpdProcessInfo

              Command Text: ps -w -A -o comm,pid,args | grep ^dhcpd -w

              DefaultNextCommand Name: DhcpdProcessInfo

              Actions:

              Action Name: ParseIscDhcpProcessInfo

              Next command name: ComputeConfigFilePath

              Rule:

                Rule Name: ParseProcessInfo

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: ^dhcp.?\s+(?<FullCommandOutput>.+)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

               

               

              -- raw value end ------------------------------------------

               

               

                Child Rules:

                 Rule Name: ParseProcessPid

                 Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                  RegexPattern: ^dhcp.?\s+(?<ProcessPid>\d+)\s+.*

                  Matches [count=1]:

                   RawValue:

              -- raw value begin -------------------------------------

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

              -- raw value end ------------------------------------------

                 Rule Name: ParseProcessCmd

                 Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                  RegexPattern: ^dhcp.?\s+\d+\s+(?<ProcessCmd>.+)

                  Matches [count=1]:

                   RawValue:

              -- raw value begin -------------------------------------

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid

               

               

              -- raw value end ------------------------------------------

                 Rule Name: ParseCustomConfigPath

                 Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                  RegexPattern: ^dhcp.*-cf\s+(?<CustomConfigPath>[/\w\.-_]+)

                  Matches [count=1]:

                   RawValue:

              -- raw value begin -------------------------------------

              dhcpd           24803 /usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf

              -- raw value end ------------------------------------------

                 Rule Name: ParseChrootPath

                 Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                  RegexPattern: ^dhcp.*-chroot\s+(?<ChrootPath>[/\w]+)

                  Matches [count=0]:

                 Rule Name: ParseLeaseFilePath

                 Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                  RegexPattern: ^dhcp.*-lf\s+(?<LeaseFilePath>[/\w\.-_]+)

                  Matches [count=0]:

              2015-06-24 09:53:07,082 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

              2015-06-24 09:53:07,085 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

              2015-06-24 09:53:07,085 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: ComputeConfigFilePath

              DefaultNextCommand Name: Set:[ErrorCode]=0

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.IscDhcpProcessInfoCommandBuilder+ConfigPathCalculation

               

               

              2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:07,086 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:07,087 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,087 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: SeekFileExist :/etc/dhcpd.conf

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:07,088 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/dhcpd.conf]...

              2015-06-24 09:53:07,088 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/dhcpd.conf" ] && echo 'true'']...

              2015-06-24 09:53:07,089 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,089 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,090 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,090 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,091 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/dhcpd.conf" ] && echo 'true'

               

               

              2015-06-24 09:53:07,093 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/dhcpd.conf" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,094 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,095 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd4,Command='[ -f "/etc/dhcpd.conf" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,095 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,096 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,096 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0070117]

               

               

              2015-06-24 09:53:07,097 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,098 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,099 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/dhcpd.conf] executed

              2015-06-24 09:53:07,099 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,100 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/dhcpd.conf

              Command Text: [ -f "/etc/dhcpd.conf" ] && echo 'true'

              DefaultNextCommand Name: Set:[ErrorCode]=2002

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/etc/inet/dhcpd4.conf

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

              2015-06-24 09:53:07,100 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/inet/dhcpd4.conf]...

              2015-06-24 09:53:07,101 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'']...

              2015-06-24 09:53:07,101 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,102 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,102 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,103 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,103 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

               

               

              2015-06-24 09:53:07,105 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,106 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd5,Command='[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,107 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,108 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'',WaitTime=00:00:00.0060503]

               

               

              2015-06-24 09:53:07,108 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,109 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,110 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/inet/dhcpd4.conf] executed

              2015-06-24 09:53:07,110 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/inet/dhcpd4.conf

              Command Text: [ -f "/etc/inet/dhcpd4.conf" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/etc/dhcp/dhcpd.conf

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

              2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/dhcp/dhcpd.conf]...

              2015-06-24 09:53:07,111 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'']...

              2015-06-24 09:53:07,112 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,112 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,113 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,113 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,114 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

               

               

              2015-06-24 09:53:07,116 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

              true

              [root@localhost ~]#

              2015-06-24 09:53:07,117 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,117 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd6,Command='[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'']

              true

               

               

              2015-06-24 09:53:07,118 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,118 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0060933]

              true

               

               

              2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,119 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,120 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/dhcp/dhcpd.conf] executed

              2015-06-24 09:53:07,120 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,121 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/dhcp/dhcpd.conf

              Command Text: [ -f "/etc/dhcp/dhcpd.conf" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/usr/local/etc/dhcpd.conf

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=2]:

                  RawValue:

              -- raw value begin -------------------------------------

              true

              -- raw value end ------------------------------------------

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,121 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/usr/local/etc/dhcpd.conf]...

              2015-06-24 09:53:07,122 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'']...

              2015-06-24 09:53:07,122 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,123 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,123 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,124 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,124 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

               

               

              2015-06-24 09:53:07,126 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,127 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,127 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd7,Command='[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,128 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,128 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,129 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'',WaitTime=00:00:00.0060827]

               

               

              2015-06-24 09:53:07,129 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,130 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,130 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/usr/local/etc/dhcpd.conf] executed

              2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/usr/local/etc/dhcpd.conf

              Command Text: [ -f "/usr/local/etc/dhcpd.conf" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: FindDuplicateConfigFile

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,131 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDuplicateConfigFile]...

              2015-06-24 09:53:07,134 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDuplicateConfigFile] executed

              2015-06-24 09:53:07,134 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,135 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: FindDuplicateConfigFile

              DefaultNextCommand Name: ComputeConfigFilePath

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekConfigFileLocationCommadBuilder+FindDuplicateConfigFile

               

               

              2015-06-24 09:53:07,135 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

              2015-06-24 09:53:07,137 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

              2015-06-24 09:53:07,138 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,138 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: ComputeConfigFilePath

              DefaultNextCommand Name: Set:[ErrorCode]=0

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekConfigFileLocationCommadBuilder+LocateConfigFile

               

               

              2015-06-24 09:53:07,139 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:07,139 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: SeekFileExist :/var/db/dhcpd.leases

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:07,140 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/db/dhcpd.leases]...

              2015-06-24 09:53:07,141 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/db/dhcpd.leases" ] && echo 'true'']...

              2015-06-24 09:53:07,141 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,142 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,142 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,143 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,143 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

               

               

              2015-06-24 09:53:07,145 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,146 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,147 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd8,Command='[ -f "/var/db/dhcpd.leases" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,147 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,148 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,148 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/db/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0063803]

               

               

              2015-06-24 09:53:07,149 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,149 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,150 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/db/dhcpd.leases] executed

              2015-06-24 09:53:07,150 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/var/db/dhcpd.leases

              Command Text: [ -f "/var/db/dhcpd.leases" ] && echo 'true'

              DefaultNextCommand Name: Set:[ErrorCode]=2004

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/var/lib/dhcpd/dhcpd.leases

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/lib/dhcpd/dhcpd.leases]...

              2015-06-24 09:53:07,151 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'']...

              2015-06-24 09:53:07,152 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,152 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,153 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,153 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,154 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

               

               

              2015-06-24 09:53:07,156 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

              true

              [root@localhost ~]#

              2015-06-24 09:53:07,157 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,158 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd9,Command='[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'']

              true

               

               

              2015-06-24 09:53:07,158 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,159 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,159 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0066383]

              true

               

               

              2015-06-24 09:53:07,160 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,160 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/lib/dhcpd/dhcpd.leases] executed

              2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,161 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/var/lib/dhcpd/dhcpd.leases

              Command Text: [ -f "/var/lib/dhcpd/dhcpd.leases" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/var/lib/dhcp/dhcpd.leases

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=2]:

                  RawValue:

              -- raw value begin -------------------------------------

              true

              -- raw value end ------------------------------------------

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,162 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/lib/dhcp/dhcpd.leases]...

              2015-06-24 09:53:07,162 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'']...

              2015-06-24 09:53:07,163 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,163 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,164 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,164 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,165 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

               

               

              2015-06-24 09:53:07,166 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,167 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,168 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd10,Command='[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,169 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,169 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,170 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0065928]

               

               

              2015-06-24 09:53:07,170 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,171 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,171 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/lib/dhcp/dhcpd.leases] executed

              2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/var/lib/dhcp/dhcpd.leases

              Command Text: [ -f "/var/lib/dhcp/dhcpd.leases" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/var/db/dhcpd/dhcpd.leases

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,172 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/var/db/dhcpd/dhcpd.leases]...

              2015-06-24 09:53:07,173 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'']...

              2015-06-24 09:53:07,173 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,174 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,174 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,175 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,175 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

               

               

              2015-06-24 09:53:07,177 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,178 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,179 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd11,Command='[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,180 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,180 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,181 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'',WaitTime=00:00:00.0071462]

               

               

              2015-06-24 09:53:07,181 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,182 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,182 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/var/db/dhcpd/dhcpd.leases] executed

              2015-06-24 09:53:07,183 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,183 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/var/db/dhcpd/dhcpd.leases

              Command Text: [ -f "/var/db/dhcpd/dhcpd.leases" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: FindDuplicateLeaseFile

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,184 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [FindDuplicateLeaseFile]...

              2015-06-24 09:53:07,202 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [FindDuplicateLeaseFile] executed

              2015-06-24 09:53:07,202 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,203 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: FindDuplicateLeaseFile

              DefaultNextCommand Name: ComputeConfigFilePath

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekLeaseFileLocationCommadBuilder+FindDuplicateLeaseFile

               

               

              2015-06-24 09:53:07,203 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeConfigFilePath]...

              2015-06-24 09:53:07,206 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeConfigFilePath] executed

              2015-06-24 09:53:07,206 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: ComputeConfigFilePath

              DefaultNextCommand Name: Set:[ErrorCode]=0

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekLeaseFileLocationCommadBuilder+LocateLeaseFile

               

               

              2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=0]...

              2015-06-24 09:53:07,207 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=0] executed

              2015-06-24 09:53:07,208 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,208 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=0

              DefaultNextCommand Name: SeekFileExist :/etc/init.d/dhcpd

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:07,209 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/dhcpd]...

              2015-06-24 09:53:07,209 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/dhcpd" ] && echo 'true'']...

              2015-06-24 09:53:07,210 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,210 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,211 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,211 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,212 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

               

               

              2015-06-24 09:53:07,213 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,214 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd12,Command='[ -f "/etc/init.d/dhcpd" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,215 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,216 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/dhcpd" ] && echo 'true'',WaitTime=00:00:00.0058007]

               

               

              2015-06-24 09:53:07,216 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,219 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,220 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/dhcpd] executed

              2015-06-24 09:53:07,220 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,221 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/init.d/dhcpd

              Command Text: [ -f "/etc/init.d/dhcpd" ] && echo 'true'

              DefaultNextCommand Name: Set:[ErrorCode]=2015

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/etc/init.d/dhcp

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,221 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/dhcp]...

              2015-06-24 09:53:07,222 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/dhcp" ] && echo 'true'']...

              2015-06-24 09:53:07,222 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,223 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,223 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,224 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,224 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/dhcp" ] && echo 'true'

               

               

              2015-06-24 09:53:07,226 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/dhcp" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd13,Command='[ -f "/etc/init.d/dhcp" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,227 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,228 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,228 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/dhcp" ] && echo 'true'',WaitTime=00:00:00.0057003]

               

               

              2015-06-24 09:53:07,229 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,229 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,230 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/dhcp] executed

              2015-06-24 09:53:07,230 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,231 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/init.d/dhcp

              Command Text: [ -f "/etc/init.d/dhcp" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/etc/rc.d/dhcpd

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,231 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/rc.d/dhcpd]...

              2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/rc.d/dhcpd" ] && echo 'true'']...

              2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,232 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,233 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,233 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,234 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

               

               

              2015-06-24 09:53:07,237 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,238 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd14,Command='[ -f "/etc/rc.d/dhcpd" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,239 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,240 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/rc.d/dhcpd" ] && echo 'true'',WaitTime=00:00:00.0074167]

               

               

              2015-06-24 09:53:07,240 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,241 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,241 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/rc.d/dhcpd] executed

              2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/rc.d/dhcpd

              Command Text: [ -f "/etc/rc.d/dhcpd" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,242 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd]...

              2015-06-24 09:53:07,243 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'']...

              2015-06-24 09:53:07,244 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,244 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,245 [10] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,246 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,246 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

               

               

              2015-06-24 09:53:07,248 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,249 [14] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,249 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd15,Command='[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,250 [14] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,250 [14] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,250 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'',WaitTime=00:00:00.0064600]

               

               

              2015-06-24 09:53:07,251 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,251 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,252 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd] executed

              2015-06-24 09:53:07,252 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/usr/local/etc/rc.d/isc-dhcpd

              Command Text: [ -f "/usr/local/etc/rc.d/isc-dhcpd" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: SeekFileExist :/etc/init.d/isc-dhcp-server

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [SeekFileExist :/etc/init.d/isc-dhcp-server]...

              2015-06-24 09:53:07,253 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Processing command ['[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'']...

              2015-06-24 09:53:07,254 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] ProcessCommand execution signal sent.

              2015-06-24 09:53:07,255 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Waiting for output...

              2015-06-24 09:53:07,255 [14] DEBUG SwTelnet9CommandProcessor - [1] Next ProcessCommand executed.

              2015-06-24 09:53:07,255 [14] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,256 [14] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Sending: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

               

               

              2015-06-24 09:53:07,258 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Incoming Data: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

              [root@localhost ~]#

              2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - { CommandComplete entered

              2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet Command Complete. Output: [Name=cmd16,Command='[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'']

               

               

              2015-06-24 09:53:07,259 [10] DEBUG SwTelnet9CommandProcessor - [1] Command output signal sent.

              2015-06-24 09:53:07,260 [10] DEBUG SwTelnet9CommandProcessor - [1] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:07,260 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Command output received. Output: [Command='[ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'',WaitTime=00:00:00.0057358]

               

               

              2015-06-24 09:53:07,261 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Applying rule to command result [action=ParseCheckFileExistOutput, rule=ParseCheckFileExistOutput]...

              2015-06-24 09:53:07,261 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.ParserResponseAction - Command output rule [ParseCheckFileExistOutput] succeeded.

              2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [SeekFileExist :/etc/init.d/isc-dhcp-server] executed

              2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,262 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: SeekFileExist :/etc/init.d/isc-dhcp-server

              Command Text: [ -f "/etc/init.d/isc-dhcp-server" ] && echo 'true'

              DefaultNextCommand Name: null

              Actions:

              Action Name: ParseCheckFileExistOutput

              Next command name: ComputeScriptFilePath

              Rule:

                Rule Name: ParseCheckFileExistOutput

                Parser: SolarWinds.Orion.IpSla.Parsing.RegexParser

                 RegexPattern: (?<CheckFileExist>^true|^\s*)

                 Matches [count=1]:

                  RawValue:

              -- raw value begin -------------------------------------

               

               

              -- raw value end ------------------------------------------

               

               

               

               

               

               

               

               

              2015-06-24 09:53:07,263 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [ComputeScriptFilePath]...

              2015-06-24 09:53:07,266 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [ComputeScriptFilePath] executed

              2015-06-24 09:53:07,267 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,267 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: ComputeScriptFilePath

              DefaultNextCommand Name: Set:[ErrorCode]=0

              Calculation: Solarwinds.IPAM.Jobs.DHCP.ISCDhcp.Commands.SeekScriptFileLocationCommadBuilder+LocateScriptFile

               

               

              2015-06-24 09:53:07,268 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [Set:[ErrorCode]=2014]...

              2015-06-24 09:53:07,268 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [Set:[ErrorCode]=2014] executed

              2015-06-24 09:53:07,269 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:07,269 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: Set:[ErrorCode]=2014

              DefaultNextCommand Name: null

              Calculation: SolarWinds.Orion.IpSla.Cli.ContextVariableSetter`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]

               

               

              2015-06-24 09:53:07,274 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnecting. [Host=192.168.19.236]...

              2015-06-24 09:53:07,274 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnected. [Host=192.168.19.236]

              2015-06-24 09:53:07,275 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [1] Disconnect signal sent.

              2015-06-24 09:53:07,276 [STP SmartThreadPool Thread #0] INFO  SwTelnet9CommandProcessor - [1] Processing stats: Host=192.168.19.236,Response(Num=17,Min=00:00:00.0057003,Avg=00:00:00.0230978,Max=00:00:00.2244744),Command(Num=17,Min=00:00:00.0049740,Avg=00:00:00.0118117,Max=00:00:00.0496234)

              2015-06-24 09:53:07,278 [10] DEBUG SwTelnet9CommandProcessor - [1] Processor disconnected.

              2015-06-24 09:53:07,279 [10] DEBUG SwTelnet9CommandProcessor - } CommandComplete exited

              2015-06-24 09:53:07,289 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Processor created.

              2015-06-24 09:53:07,290 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Preparing to connect... [Host=192.168.19.236]

              2015-06-24 09:53:07,291 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Connecting... [Host=192.168.19.236]

              2015-06-24 09:53:07,455 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:07,456 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:07,685 [10] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data: Last login: Wed Jun 24 09:49:30 2015 from dodo.uis.edu.co

               

               

               

               

              2015-06-24 09:53:07,701 [10] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data: [root@localhost ~]#

              2015-06-24 09:53:08,455 [14] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:08,456 [14] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:08,691 [15] DEBUG SwTelnet9CommandProcessor - [1] SWTelnet session disconnected.

              2015-06-24 09:53:09,455 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:09,456 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:10,303 [15] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Sending:

               

               

              2015-06-24 09:53:10,305 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data:

              [root@localhost ~]#

              2015-06-24 09:53:10,455 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:10,456 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:11,455 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:11,456 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:12,316 [16] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Sending:

               

               

              2015-06-24 09:53:12,318 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Incoming Data:

              [root@localhost ~]#

              2015-06-24 09:53:12,319 [14] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet Login succeeded.

              2015-06-24 09:53:12,319 [14] DEBUG SwTelnet9CommandProcessor - [2] Waiting for next ProcessCommand execution...

              2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Connected. [Host=192.168.19.236]

              2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Executing command [CheckErrorCode]...

              2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command [CheckErrorCode] executed

              2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor - Command results:

              2015-06-24 09:53:12,322 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.Orion.IpSla.Cli.CliBatchExecutor -

              Command Name: CheckErrorCode

              DefaultNextCommand Name: Assign:DownloadFileWithIncludesPath=[ConfigFilePath]

              Calculation: Solarwinds.IPAM.Jobs.ISCCommon.Commands.CheckErrorCodeCommandBuilder+CheckErrorCodeCalculation

               

               

              2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnecting. [Host=192.168.19.236]...

              2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnected. [Host=192.168.19.236]

              2015-06-24 09:53:12,327 [STP SmartThreadPool Thread #0] DEBUG SwTelnet9CommandProcessor - [2] Disconnect signal sent.

              2015-06-24 09:53:12,329 [STP SmartThreadPool Thread #0] INFO  SwTelnet9CommandProcessor - [2] Processing stats: Host=192.168.19.236,Response(Num=0,Min=00:00:00,Avg=00:00:00,Max=00:00:00),Command(Num=0,Min=00:00:00,Avg=00:00:00,Max=00:00:00)

              2015-06-24 09:53:12,329 [14] DEBUG SwTelnet9CommandProcessor - [2] Processor disconnected.

              2015-06-24 09:53:12,329 [STP SmartThreadPool Thread #0] INFO  SolarWinds.Orion.IpSla.Jobs.Cli.CliExecutor - Finished. [Host=192.168.19.236,Duration=00:00:10.9166413]

              2015-06-24 09:53:12,344 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } DoDhcpTest exited

              2015-06-24 09:53:12,378 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } Execute exited

              2015-06-24 09:53:12,379 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.IPAM.Jobs.DhcpCliCredentialTestJob - } DhcpCliCredentialTest.Execute exited

              2015-06-24 09:53:12,394 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.JobEngine.WorkerProcess.JobMonitor - Stop tracking job 0cb29aa1-31b5-4d5b-86c5-a725d08f62b9

              2015-06-24 09:53:12,400 [STP SmartThreadPool Thread #0] DEBUG SolarWinds.JobEngine.WorkerProcess.AgentDispatcher - } ExecuteJob exited

              2015-06-24 09:53:12,459 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { GetJobResult entered

              2015-06-24 09:53:12,464 [10] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } GetJobResult exited

              2015-06-24 09:53:12,484 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - { CleanupJobResults entered

              2015-06-24 09:53:12,490 [12] DEBUG SolarWinds.JobEngine.WorkerProcess.WorkerExecutionEngine - } CleanupJobResults exited

              2015-06-24 09:53:14,318 [17] DEBUG SwTelnet9CommandProcessor - [2] SWTelnet session disconnected.

               

              Thanks for understanding.

              Looking forward to hearing from you.

            • Re: Error adding ISC DHCP Server to IPAM
              xbuys

              Any progress with this issue?  I am also getting the same error.

              • Re: Error adding ISC DHCP Server to IPAM
                jpwood

                Did you ever get it figured out?  I am also having this same issue.  IPAM 4.3.2, CentOS 7.2, DHCP 4.2.5

                 

                 

                I think it is due to the service startup changes in CentOS 7.  You can find more info here:  8.2. Managing System Services

                 

                From what I can see CentOS 7 doesn't really use startup scripts anymore.  It uses the systemd program to manage all of that and has individual files telling it the details for each service.  The scripts are no longer in the /etc/init.d directory and so IPAM fails to add the server when it cannot find them.  

                 

                 

                I have a ticket open with support but do not have an official answer at this time.

                • Re: Error adding ISC DHCP Server to IPAM
                  alexmoen

                  I also have this issue... Any forward progress at all?  Is anyone listening?  I hear echos...

                  • Re: Error adding ISC DHCP Server to IPAM
                    maryan.dmytriv

                    IPAM 4.6 has many compatibility RHEL7 and CentOS7 issues fixed. You can try IPAM 4.6 RC3, which is available on customer portal