CONFIG ROUTER IP SLA

Here is an example of what I use for one of my routers:

track 11 ip sla 11

!

track 12 ip sla 12

ip sla auto discovery

ip sla 11

icmp-echo xx.xx.xx.xx

ip sla schedule 11 life forever start-time now

ip sla 12

icmp-echo xx.xx.xx.xx source-interface GigabitEthernet0/0

frequency 30

ip sla schedule 12 life forever start-time now

I have included the two different ones to show how you can indicate what interface you want the icmp-echo to use. Please let me know if you have any questions. I also use my ip sla for tracking my HSRP, so that is at the top as well.

When you add a node to the VNQM module (Previously IPSLA) you should be able to add a CLI credential or the SNMP Read/Write credential.  SolarWinds will automatically update the IPSLA configuration in the node's configuration via either CLI or SNMP.

Thank you very much!

Hello,

How to monitor a router IP SLA in solarwinds?

Thanks

Hello, how to add a CLI credential or the SNMP Read/Write credential?

chira wrote: Hello, how to add a CLI credential or the SNMP Read/Write credential?

I just replied to this message in your other thread. But basically add the node into NPM which is where you assign the CLI & SNMP credentials.