This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Problems with the configuration NTA Solarwinds

Recently I installed the Orion NPM with NTA Solarwinds, and I am testing it along the Manage Engine Netflow. I notice that the NTA in the TOP 5 Conversations of the WAN it seems to be like they only show the broadcast conversations that are located in the LAN, rager than the Managen Engine that really shows the conversations that is traversin the WAN link. That i Miis something to configure in thge NTA o Router?

The configurations in my Router Cisco 2800 Branch Office is (Where is monitored by Solarwinds):

ip flow-cache timeout active 1

ip flow-export source Loopback0

ip flow-export version 9

ip flow-export destination xx.xx.xx.xx 9996

!

interface Serial0/0/1

bandwidth 1024

ip flow ingress

ip flow egress

ip address xx.xx.xx.xx

ip route-cache flow

no ip mroute-cache

end

The configurations in my Router Cisco ASR1006 HQ Office is (Where is monitored by ManageEngine):

ip flow-export source Loopback0

ip flow-export version 9

ip flow-export destination xx.xx.xx.xx 9996

!

interface GigabitEthernet0/2/1.24

bandwidth 1024

encapsulation dot1Q 24

ip address xx.xx.xx.xx

ip flow ingress

ip flow egress