0 Replies Latest reply on Aug 23, 2013 7:11 AM by shaker

    configure juniper devices for NTA

    shaker

      Hi,

       

      I have to monitor NTA at our Juniper devices.We have S-series  and  J-series router.Inorder to do that do we have to enable jflow and sflow.If yes then for jflow i have got the following command from junipers jflow document

       

      set services flow-monitoring version9 template ipv4-test ipv4-template
      set forwarding-options sampling input rate 1
      set forwarding-options sampling input run-length 0
      set forwarding-options sampling family inet output flow-server 172.19.101.85 port
      2222
      set forwarding-options sampling family inet output flow-server 172.19.101.85
      version9 template ipv4-test
      set forwarding-options sampling family inet output inline-jflow source-address
      172.19.101.132
      set interfaces ge-0/0/14 unit 0 family inet sampling input
      set interfaces ge-0/0/14 unit 0 family inet address 23.23.23.1/24

       

      What shall we use as the port number,sampling input rate,sampling input run-length..I want to monitor traffic from all the interfaces.