22 Replies Latest reply on Apr 9, 2014 2:34 AM by rgnanda

    CATTOOLS CLI.Send Commands on Juniper EX replies Command is invalid

    avajuncis

      Hello there,

       

      I want to send some show commands via CATTOOLS to some Juniper EX-Switch.

      However, I constantly get "Command is invalid". Entering the commands (directly) in a ssh session I can proove, that the commands are correct.

      I configured the Device as Juniper.Router (as there is no Juniper.Switch).

       

      Looking at the Debog Log I can see, that login to Device was successfull.

       

      The output in my log-file varies....

      For example:

       

      The following 2 commands should be send:

      show system uptime

      show version

       

      "show system uptime" is mentioned as invalid command.

       

      The output i get in my log file is:

       

       

                             ^

      unknown command.

       

      {master:0}

      prompt> show system uptime

       

      show version

      fpc0:

      --------------------------------------------------------------------------

      Current time: 2013-08-21 12:53:37 CEST

      System booted: 2012-12-19 13:36:29 CET (34w6d 22:17 ago)

      Protocols started: 2012-12-19 13:39:25 CET (34w6d 22:14 ago)

      Last configured: 2013-06-19 19:01:27 CEST (8w6d 17:52 ago) by pst

      12:53PM  up 244 days, 22:17, 3 users, load averages: 0.63, 0.37, 0.29

       

      fpc1:

      --------------------------------------------------------------------------

      Current time: 2013-08-21 12:53:37 CEST

      System booted: 2012-12-19 13:36:49 CET (34w6d 22:16 ago)

      Protocols started: 2012-12-19 13:39:24 CET (34w6d 22:14 ago)

      Last configured: 2013-06-19 19:01:20 CEST (8w6d 17:52 ago) by pst

      12:53PM  up 244 days, 22:17, 0 users, load averages: 0.22, 0.12, 0.09

       

      fpc2:

      --------------------------------------------------------------------------

      Current time: 2013-08-21 12:53:37 CEST

      System booted: 2012-12-19 13:37:10 CET (34w6d 22:16 ago)

      Last configured: 2013-06-19 19:01:20 CEST (8w6d 17:52 ago) by pst

      12:53PM  up 244 days, 22:16, 0 users, load averages: 0.04, 0.02, 0.00

       

      {master:0}

      prompt> show version

       

      #################

      If I request the following 2 commands should be send (just the other way round):

      show version

      show system uptime

       

      Show version is ment to be the invalid command......

       

      However, the outputfile looks like:

       

       

                             ^

      unknown command.

       

      {master:0}

      prompt> show version

       

      show system uptime

      fpc0:

      --------------------------------------------------------------------------

      Hostname: xyz

      Model: ex4200-24f

      JUNOS Base OS boot [12.2R2.4]

      JUNOS Base OS Software Suite [12.2R2.4]

      JUNOS Kernel Software Suite [12.2R2.4]

      JUNOS Crypto Software Suite [12.2R2.4]

      JUNOS Online Documentation [12.2R2.4]

      JUNOS Enterprise Software Suite [12.2R2.4]

      JUNOS Packet Forwarding Engine Enterprise Software Suite [12.2R2.4]

      JUNOS Routing Software Suite [12.2R2.4]

      JUNOS Web Management [12.2R2.4]

      JUNOS FIPS mode utilities [12.2R2.4]

       

      fpc1:

      --------------------------------------------------------------------------

      Hostname: xyz

      Model: ex4200-24f

      JUNOS Base OS boot [12.2R2.4]

      JUNOS Base OS Software Suite [12.2R2.4]

      JUNOS Kernel Software Suite [12.2R2.4]

      JUNOS Crypto Software Suite [12.2R2.4]

       

      Wrote 41 lines of output to 'how system uptime'

       

      JUNOS Kernel Software Suite [12.2R2.4]

      JUNOS Crypto Software Suite [12.2R2.4]

      JUNOS Online Documentation [12.2R2.4]

      JUNOS Enterprise Software Suite [12.2R2.4]

      JUNOS Packet Forwarding Engine Enterprise Software Suite [12.2R2.4]

      JUNOS Routing Software Suite [12.2R2.4]

      JUNOS Web Management [12.2R2.4]

      JUNOS FIPS mode utilities [12.2R2.4]

       

      {master:0}

      prompt>

       

      ###################

       

      Can someone help?

      Thank you in advance!