No, this is the UnDP I found:
It actually worked well, but it wasnt what I was needing.
I did an SNMP walk on the Liebert and it showed that the OID's were valid. I tried creating my own UnDP file but it didnt work.
These are the OID's
Sorry, I guess I could have been a little more descriptive in my last message.
When I say that the poller didnt work, I didnt get an error message or anything. It simply didnt do anything. I would import the poller but it would never collect anything at all. I would go to a graph and there was nothing there.
Have you confirmed your OIDs?
Try a snmpwalk or snmpget to the device and see if you get the data that you need
I'm currently monitoring some Emerson 3KVAs UPS and I'm using these OIDs:
Input Voltage -- 188.8.131.52.184.108.40.206.220.127.116.11.1
Output Voltage -- 18.104.22.168.22.214.171.124.126.96.36.199.1
Battery Load -- 188.8.131.52.184.108.40.206.2.4.0
Hope it helps.
pptmtz, those OID's display the incoming and outgoing voltage. What I need to know is how many amps are outgoing on each phase. This will give me an indication of the power distribution in our datacenter on each power phase.