0 Replies Latest reply on Mar 13, 2013 10:36 AM by brian.trotter@polypore.net

    Getting the error "You have not enabled NetFlow data export on the [device]"

    brian.trotter@polypore.net

      I am using Netflow on several dozen devices. There is one particular router that I can not get to work. It is a Cisco 3925 router.

      I add this configuration to the router:

      [Global Config]

      ip flow-cache timeout active 1

      ip flow-export source GigabitEthernet0/0

      ip flow-export version 9

      ip flow-export destination 10.123.45.67 2055

      [/Global Config]

       

      I then set this on each interface I want monitored

       

      [Interface Config]

      ip flow ingress

      [/Interface Config]

       

      When I run "show ip flow export", I see this:

       

      [Export Stats]

      Router01#   show ip flow export

      Flow export v9 is enabled for main cache

        Export source and destination details :

        VRF ID : Default

          Source(1)       10.111.22.33 (GigabitEthernet0/0)

          Destination(1)  10.123.45.67 (2055)

        Version 9 flow records

        247979957 flows exported in 8565796 udp datagrams

        0 flows failed due to lack of export packet

        172 export packets were sent up to process level

        0 export packets were dropped due to no fib

        258 export packets were dropped due to adjacency issues

        0 export packets were dropped due to fragmentation failures

        0 export packets were dropped due to encapsulation fixup failures

      Router01#

      [/Export Stats]

       

      I have it managed through NPM by the address for the Gig0/0 interface, but for NTA it always shows me the following error:

      You have not enabled NetFlow data export on the 10.111.22.33 device. For more information, see "Enabling NetFlow and NetFlow Data Export (NDE) on Cisco Catalyst Switches" in the Support - Product Documentation area of www.solarwinds.com.

       

       

      Any ideas on what I am doing wrong?