1 Reply Latest reply on Jan 24, 2013 10:59 AM by smartd

    Juniper Hadware Health 10.4

    sja

      PS.jpg

      Hi

       

      I have some Juniper from MX80 to MX960

       

      I dont get any value from the PS

      I can get that info from CLI command

      show chassis power

      PEM 0:

        State:     Online

        DC input:  OK (1 feed expected, 1 feed connected)

        DC input:  48.0 V input (53000 mV)

        Capacity:  2440 W (maximum 2440 W)

        DC output: 371 W (zone 0, 7 A at 53 V, 15% of capacity)

       

      Anyone with different result ?

       

      /SJA

        • Re: Juniper Hadware Health 10.4
          smartd

          Yep.  Juniper Health is sickly:

           

          Here's some JUNOS definitions:

          PIM - Physical Interface Model - found in J Series - adaptor card for I/F's - T1, ADSL, Ethernet......

          PIC- Physical Interface Card - found in other JUNOS Routers - adaptor card for I/F's - T1, ADSL, Ethernet...... used in M series routers

          FPC - Flexible PIC Concentrator - PICS go into FPC's on larger routers - - example 4 PIC's to an FPC - used in larger routers

          PEM - Power Entry Module - Unique to EX8200, MX, M and T routers.

           

          EX8200 - Shows PEMs as Running.  Shows Temperature

           

          EX4500 - Shows power supplies, but appears duplicated since it does not show the assigned FPC.  Same with Fans. NO TEMPERATURE

          Class Item                       Status Measurement
          Power FPC 0 Power Supply 0       OK
            FPC 0 Power Supply 0 Airflow   OK     Back to front
            FPC 0 Power Supply 1       OK
            FPC 0 Power Supply 1 Airflow   OK     Back to front
            FPC 0 Power Supply 2       Absent
            FPC 0 Power Supply 3       Absent
            FPC 0 Power Supply 4       Absent
            FPC 1 Power Supply 0       OK
            FPC 1 Power Supply 0 Airflow   OK     Back to front
            FPC 1 Power Supply 1       OK
            FPC 1 Power Supply 1 Airflow   OK     Back to front
            FPC 1 Power Supply 2       Absent
            FPC 1 Power Supply 3       Absent
            FPC 1 Power Supply 4       Absent
          Temp  FPC 0 Rear Left PCB        OK     40 degrees C / 104 degrees F
            FPC 0 Rear Middle PCB      OK     40 degrees C / 104 degrees F
            FPC 0 Rear Right PCB       OK     40 degrees C / 104 degrees F
            FPC 0 PHY0                 OK     43 degrees C / 109 degrees F
            FPC 0 PHY6                 OK     42 degrees C / 107 degrees F
            FPC 0 PHY12                OK     43 degrees C / 109 degrees F
            FPC 0 PHY19                OK     51 degrees C / 123 degrees F
            FPC 1 Rear Left PCB        OK     41 degrees C / 105 degrees F
            FPC 1 Rear Middle PCB      OK     40 degrees C / 104 degrees F
            FPC 1 Rear Right PCB       OK     40 degrees C / 104 degrees F
            FPC 1 PHY0                 OK     42 degrees C / 107 degrees F
            FPC 1 PHY6                 OK     42 degrees C / 107 degrees F
            FPC 1 PHY12                OK     43 degrees C / 109 degrees F
            FPC 1 PHY19                OK     50 degrees C / 122 degrees F
          Fans  FPC 0 Fan 1                OK     Spinning at normal speed
            FPC 0 Fan 2                OK     Spinning at normal speed
            FPC 0 Fan 3                OK     Spinning at normal speed
            FPC 0 Fan 4                OK     Spinning at normal speed
            FPC 0 Fan 5                OK     Spinning at normal speed
            FPC 0 Fan-Tray Airflow     OK     Back to front
            FPC 1 Fan 1                OK     Spinning at normal speed
            FPC 1 Fan 2                OK     Spinning at normal speed
            FPC 1 Fan 3                OK     Spinning at normal speed
            FPC 1 Fan 4                OK     Spinning at normal speed
            FPC 1 Fan 5                OK     Spinning at normal speed
            FPC 1 Fan-Tray Airflow     OK     Back to front

           

          ====================================================

          EX4200 - Shows 12 fan 1s and 4 Power supply 0s.  Not sure why it has 12 fans since it has 4 FPC.  The power supplies add up.  Temperature good

          Class Item                       Status Measurement
          Power FPC 0 Power Supply 0       OK
            FPC 0 Power Supply 1       Absent
            FPC 0 Power Supply 2       Absent
            FPC 0 Power Supply 3       Absent
            FPC 0 Power Supply 4       Absent
            FPC 1 Power Supply 0       OK
            FPC 1 Power Supply 1       Absent
            FPC 1 Power Supply 2       Absent
            FPC 1 Power Supply 3       Absent
            FPC 1 Power Supply 4       Absent
            FPC 2 Power Supply 0       OK
            FPC 2 Power Supply 1       Absent
            FPC 2 Power Supply 2       Absent
            FPC 2 Power Supply 3       Absent
            FPC 2 Power Supply 4       Absent
            FPC 3 Power Supply 0       OK
            FPC 3 Power Supply 1       Absent
            FPC 3 Power Supply 2       Absent
            FPC 3 Power Supply 3       Absent
            FPC 3 Power Supply 4       Absent
          Temp  FPC 0 CPU                  OK     44 degrees C / 111 degrees F
            FPC 0 EX-PFE1              OK     47 degrees C / 116 degrees F
            FPC 0 EX-PFE2              OK     48 degrees C / 118 degrees F
            FPC 0 GEPHY Front Left     OK     31 degrees C / 87 degrees F
            FPC 0 GEPHY Front Right    OK     32 degrees C / 89 degrees F
            FPC 0 Uplink Conn          OK     37 degrees C / 98 degrees F
            FPC 1 CPU                  OK     37 degrees C / 98 degrees F
            FPC 1 EX-PFE1              OK     45 degrees C / 113 degrees F
            FPC 1 EX-PFE2              OK     47 degrees C / 116 degrees F
            FPC 1 GEPHY Front Left     OK     32 degrees C / 89 degrees F
            FPC 1 GEPHY Front Right    OK     35 degrees C / 95 degrees F
            FPC 1 Uplink Conn          OK     35 degrees C / 95 degrees F
            FPC 2 CPU                  OK     39 degrees C / 102 degrees F
            FPC 2 EX-PFE1              OK     45 degrees C / 113 degrees F
            FPC 2 EX-PFE2              OK     47 degrees C / 116 degrees F
            FPC 2 GEPHY Front Left     OK     31 degrees C / 87 degrees F
            FPC 2 GEPHY Front Right    OK     33 degrees C / 91 degrees F
            FPC 2 Uplink Conn          OK     38 degrees C / 100 degrees F
            FPC 3 CPU                  OK     43 degrees C / 109 degrees F
            FPC 3 EX-PFE1              OK     48 degrees C / 118 degrees F
            FPC 3 EX-PFE2              OK     48 degrees C / 118 degrees F
            FPC 3 GEPHY Front Left     OK     34 degrees C / 93 degrees F
            FPC 3 GEPHY Front Right    OK     36 degrees C / 96 degrees F
            FPC 3 Uplink Conn          OK     35 degrees C / 95 degrees F
          Fans  FPC 0 Fan 1                OK     Spinning at normal speed
            FPC 0 Fan 2                OK     Spinning at normal speed
            FPC 0 Fan 3                OK     Spinning at normal speed
            FPC 1 Fan 1                OK     Spinning at normal speed
            FPC 1 Fan 2                OK     Spinning at normal speed
            FPC 1 Fan 3                OK     Spinning at normal speed
            FPC 2 Fan 1                OK     Spinning at normal speed
            FPC 2 Fan 2                OK     Spinning at normal speed
            FPC 2 Fan 3                OK     Spinning at normal speed
            FPC 3 Fan 1                OK     Spinning at normal speed
            FPC 3 Fan 2                OK     Spinning at normal speed
            FPC 3 Fan 3                OK     Spinning at normal speed

           

          ========================================

          EX3200 - Everything is correct - Fan, Power, Temp

           

           

          EX2200 - Only shows 1 Power and 2 fans. Temp OK.

          Power FPC 0 Power Supply 0       OK
          Temp  FPC 0 CPU                  OK     43 degrees C / 109 degrees F
            FPC 0 Exhaust Area         OK     42 degrees C / 107 degrees F
            FPC 0 EX-PFE1              OK     43 degrees C / 109 degrees F
            FPC 0 Local Intake         OK     34 degrees C / 93 degrees F
            FPC 0 Remote Intake        OK     33 degrees C / 91 degrees F
            FPC 0 GEPHY1               OK     40 degrees C / 104 degrees F
            FPC 0 GEPHY2               OK     45 degrees C / 113 degrees F
            FPC 0 GEPHY3               OK     45 degrees C / 113 degrees F
            FPC 0 GEPHY4               OK     40 degrees C / 104 degrees F
            FPC 0 GEPHY5               OK     40 degrees C / 104 degrees F
            FPC 0 GEPHY6               OK     40 degrees C / 104 degrees F
          Fans  FPC 0 Fan 1                OK     Spinning at normal speed
            FPC 0 Fan 2                OK     Spinning at normal speed
            FPC 0 PSU Fan              OK     Spinning at normal speed