5 Replies Latest reply on Dec 13, 2012 1:21 PM by sja

    10.4 Juniper MX80 Hardware Health mmm..

    sja
        • Re: 10.4 Juniper MX80 Hardware Health mmm..
          wfleitz


          I have the same error too. I don't see any alarms on the router itself though....

           

          Manager@GRE-LL16-IR-A> show chassis environment cb
          CB 0 status:
            State                      Online Master
            Temperature                33 degrees C / 91 degrees F
            Power 1
              1.0 V                      992 mV
              1.0 V MQ                  1060 mV
              1.0 V LU                  1069 mV
              1.2 V                     1192 mV
              1.5 V                     1501 mV
              1.8 V                     1795 mV
              2.5 V                     2516 mV
              3.3 V                     3274 mV
              5.0 V                     5104 mV
              5.0 V bias                5033 mV
              12.0 V                   12007 mV

          Manager@GRE-LL16-IR-A> show chassis alarms
          No alarms currently active

          Manager@GRE-LL16-IR-A>

            • Re: 10.4 Juniper MX80 Hardware Health mmm..
              jeff.stewart

              Can you open a ticket with support and provide an SNMP walk of the device?

                • Re: 10.4 Juniper MX80 Hardware Health mmm..
                  sja

                  Hi Jeff

                   

                  I sure did, the ticket is 412891

                  Funny about the Juniper MX80 SNMP WALK.

                  Michal H from Solarwinds  got the same SNMP walk from me at 10.8.2012

                  When SW start working on HH

                   

                  Her is the walk Michal got

                   

                   

                  Juniper MX80

                  show snmp mib walk 1.3.6.1.2.1.25.6.3

                  1. hrSWInstalledIndex.2 = 2
                  2. hrSWInstalledIndex.3 = 3
                  3. hrSWInstalledIndex.4 = 4
                  4. hrSWInstalledIndex.5 = 5
                  5. hrSWInstalledIndex.6 = 6
                  6. hrSWInstalledIndex.7 = 7
                  7. hrSWInstalledName.2 = JUNOS Base OS Software Suite [11.4R1.14]
                  8. hrSWInstalledName.3 = JUNOS Kernel Software Suite [11.4R1.14]
                  9. hrSWInstalledName.4 = JUNOS Packet Forwarding Engine Support (MX80) [11.4R1.14]
                  10. hrSWInstalledName.5 = JUNOS Routing Software Suite [11.4R1.14]
                  11. hrSWInstalledName.6 = JUNOS Online Documentation [11.4R1.14]
                  12. hrSWInstalledName.7 = JUNOS Crypto Software Suite [11.4R1.14]
                  13. hrSWInstalledID.2 = 0.0
                  14. hrSWInstalledID.3 = 0.0
                  15. hrSWInstalledID.4 = 0.0
                  16. hrSWInstalledID.5 = 0.0
                  17. hrSWInstalledID.6 = 0.0
                  18. hrSWInstalledID.7 = 0.0
                  19. hrSWInstalledType.2 = 2
                  20. hrSWInstalledType.3 = 2
                  21. hrSWInstalledType.4 = 2
                  22. hrSWInstalledType.5 = 2
                  23. hrSWInstalledType.6 = 4
                  24. hrSWInstalledType.7 = 2
                  25. hrSWInstalledDate.2 = 07 dc 06 0b  09 0e 35 00  2b 02 00
                  26. hrSWInstalledDate.3 = 07 dc 06 0b  09 0f 29 00  2b 02 00
                  27. hrSWInstalledDate.4 = 07 dc 06 0b  09 0f 37 00  2b 02 00
                  28. hrSWInstalledDate.5 = 07 dc 06 0b  09 10 12 00  2b 02 00
                  29. hrSWInstalledDate.6 = 07 dc 06 0b  09 10 00 00  2b 02 00
                  30. hrSWInstalledDate.7 = 07 dc 06 0b  09 0f 31 00  2b 02 00