Can you post the debug log ensuring to **** out any sensitive info?
“... has not yet had this functionality added. Skipping this device”, normally means that the activity you have chosen is not supported by the device type.
If you are trying to backup the device with the ‘Device.Backup.TFTP’ activity, then this is the problem (it's not supported on the Cisco NXOS device type). Try using the ‘Device.Backup.Running config’ activity instead.
For more information on which activities are supported on which device types, see the device matrix: http://www.kiwisyslog.com/wrapper/devices-supported/
Indeed it works with this type of job.
Thank you very much ! For my personnal culture, why TFTP fails on NXOS ?
Its probably not that TFTP fails on the NXOS, it's that the activity has not been added to the device type in CatTools as there has not been the demand for it.
The reasons we may look at added the Device.Backup.TFTP activity is if:
a) the device does not support a 'show running' or similar type command to display the config to the terminal window;
b) the 'show running' or similar command does not show the FULL device configuration which is sufficient to reload back to the device if you need to restore it. (for example a VLAN database .dat file may need to be backed up separately via TFTP).