3 Replies Latest reply on Dec 30, 2010 3:37 PM by licensing@nlc.com.au

    MIBs and OIDs for HP servers

      Hey guys, just wondering which MIBs/OIDs are used to monitor HP server hardware. I want to set up traps for specific hardware failure (RAM and disk array in particular).

      Thanks in advance.

      Grant

        • Re: MIBs and OIDs for HP servers
          Fodome

          Hi Grant,

          I'm not sure about SNMP Traps, but normally the following OIDs are used with the Custom SNMP Monitor to monitor various items:

          For Compaq/HP Servers:

          • 1.3.6.1.4.1.232.6.1.3.0 - System status
          • 1.3.6.1.4.1.232.3.2.2.1.10.6 - Raid status
          • 1.3.6.1.4.1.232.3.2.2.2.1.5 - RAID accelerator status
          • 1.3.6.1.4.1.232.3.2.5.1.1.37 - Drive condition
          • 1.3.6.1.4.1.232.6.2.6.7.1.6 - Fan speed
          • 1.3.6.1.4.1.232.6.2.6.4 - Fan status
          • 1.3.6.1.4.1.232.6.2.14.4 - Memory status
          • 1.3.6.1.4.1.232.6.2.9.3.1.4 - PSU status.
          • 1.3.6.1.4.1.232.6.2.6.1 - Overall thermal status

          For Dell System:

          • 1.3.6.1.4.1.674.10892.1.200.10.1.4.1 - SystemStateChassisStatus
          • 1.3.6.1.4.1.674.10893.1.20.110.13.0 - AgentGlobalSystemStatus
          • 1.3.6.1.4.1.674.10893.1.1.130.4.1.4 - Disk State
          • 1.3.6.1.4.1.674.10893.1.20.130.4.1.4 - ArrayDiskState
          • 1.3.6.1.4.1.674.10893.1.1.130.1.1.5 - Controller State
          • 1.3.6.1.4.1.674.10893.1.1.2 - Array Manager Global Status

          Hope this helps.

          Chris Foley