This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

problems with netflow ingress command

Hi,

 

I have a 6509, on which i am configuring netflow 5. I have added all the commands. however i ma unable to add

ip flow ingress layer2-switched vlan 99
int gi1/10
ip flow ingress

My curent configureation is :


mls ip multicast flow-stat-timer 9
mls aging long 64
mls aging normal 32
mls flow ip interface-full
no mls flow ipv6
mls nde sender version 5
no mls acl tcam share-global
mls cef error action freeze

interface Vlan99
 ip address xxx.xxx.xxx.xxx 255.255.255.0
 ip flow ingress

interface GigabitEthernet1/10
 description xxxxxxxxxxxxxxxxxxxxxxxx
 ip address xxx.xxx.xxx.xxx 255.255.255.252
 no ip redirects
 

ip flow-export source Vlan99
ip flow-export version 5
ip flow-export destination xxx.xxx.xxx.xxx 2055