3 Replies Latest reply on Jun 24, 2010 3:43 PM by Jason.Henson

    Displaying Values from a Poller on a Map

    mark3267

      We monitor the temperature of individual racks within our data centre using a Jacarta Interseptor.

      I have added the custom poller to retrieve the individual temperatures (and any alarm status information) and display them in a table, as shown below

      Current Values

      Temperature - LabelHumidityinPctTemperatureinDeg
      T Cold Aisle5622
      T Rack 1/A53.522.5
      T Rack 2/A5522
      T Rack 2/B57.422
      T Rack 3/A55.121.9
      T Rack 3/B55.222.3
      T Rack 4/A57.522.1
      T Rack 4/B52.422.4
      T Rack 5/A54.522.6
      T Rack 5/B53.322.2
      T Rack 6/A54.722
      T Rack 6/B56.821.8
      T Rack 7/A56.721.9
      T Rack 7/B53.922.2
      T Rack 8/A53.822.3
      T Rack 8/B53.722
      T Rack 9/A56.321.9
      T Rack 9/B54.621.9
      T Rack 10/A54.322.1
      T Rack 10/B53.822.3
      T Rack 11/A53.622
      T Rack 11/B53.522.1
      T UPS-A36.122.6
      T UPS-B36.722.7

      Is it possible to display the individual temperatures, or other poller information like alarm status, on a map (of the data centre)?

        • Re: Displaying Values from a Poller on a Map
          Jason.Henson

          mark3267,
          The admin guide only lists the following as supported tooltips for maps. I would love to see tooltips support custom UnDP pollers as well as custom properties though. 

           

          SolarWinds,
          Can we suggest this as a feature request please?

           

           

          Thanks,
          Jason

           

           

          Interface Data Tooltips

          Interface Name
          The name of the interface as discovered from its parent node

          Operational Status
          Operational status of the interface

          Administrative Status
          Administrative status of the interface (enabled or disabled)

          Interface Type
          Numerical type of the interface, as determined by Orion NPM when the parent node is discovered.

          Transmitted Current Traffic
          The amount of traffic the interface was transmitting as of the last interface poll

          Transmitted Percent Utilization
          The percent of available bandwidth used for traffic transmitted from the interface as of the last interface poll

          Received Current Traffic
          The amount of traffic the interface was receiving as of the last interface poll

          Received Percent Utilization
          The percent of available bandwidth used for traffic received by the interface as of the last interface poll


          Node Data Tooltips

          Node Status
          Current status of the node. (up, down, warning, unplugged, or unmanaged)

          IP Address
          The IP address currently assigned to the selected node

          Machine Type
          The vendor icon and vendor description of the selected node

          Average Response Time
          The measured average response time of the selected node as of the last node poll

          Packet Loss
          The percent of all transmitted packets that are lost by the selected node as of the last node poll

          CPU Load
          The percent of available processing capacity on the selected node that is currently used as of the last node poll

          Memory Used
          The percent of available memory on the selected node that is currently used as of the last node poll

           

           

          Thanks,
          Jason Henson
          Loop1 Systems
          www.Loop1Systems.com