Monitoring Hard Drive Failures

Question

We are running ipMonitor v10. I'd like to set up monitoring of hard drive failures on our ESX servers. They are running on HP DL380 G5 servers. Does anyone have any advice on how to do this?

Thanks,

Scott

scottpazelt · Accepted Answer

I found the OIDs.

1.3.6.1.4.1.232.3.2.2.2.1.5 - RAID accelerator status

1.3.6.1.4.1.232.3.2.5.1.1.37 - drive condition

1.3.6.1.4.1.232.6.2.6.7.1.6 - fan speed (high = "oh no! server is probably going to overheat & shut itself down!")

1.3.6.1.4.1.232.6.2.6.4 - fan status

1.3.6.1.4.1.232.6.2.14.4 - memory status

1.3.6.1.4.1.232.6.2.9.3.1.4 - PSU status. Note that it will indicate PSU failure if a power supply is slotted in but not connected to the mains supply.

1.3.6.1.4.1.232.6.2.6.1 - overall thermal status