3 Replies Latest reply on Jun 9, 2010 5:57 PM by macnugetz

    Report on empty subnets

    jon0966

      Hi,

       

      A number of our subnets were entered (as reserved for future use) and do not contain any IP's.

       

      What is the best (easiest) way to write/run a report indicating subnets without any IP's?

       

       

      Jonathan

        • Re: Report on empty subnets
          jon0966

          I created a custom report (I will attach screen captures) but subnets that report back with zero IP's within the report, actually do contain IP's.

            • Re: Report on empty subnets
              jon0966

              Ok, let's ignore the above post. 

              I created a custom report.  I used the criteria that "IP: Used = 0".  The report incorrectly reports back DHCP enabled subnets that contain static IP's as containing IP:Used = 0 while in fact they do contain IP's with a status of Used.

              For example.  If a subnet is DHCP enabled, has no dynamically assigned IP's, but there are devices on this subnet that are staticly assigned, and those IP's show up as used in a chart view of that subnet, the report will display as 0 used IP's.