7 Replies Latest reply on Jun 7, 2010 11:31 AM by Andy McBride

    Netflow on Cisco Cat 4510


      I have a 4510 with the daughter card installed with netflow configured I think.  Here are the particulars from my switch and the event from net NTA every time I reboot the server.

      Mod  Submodule               Model             Serial No.   Hw   Status
       1   Netflow Services Card   WS-F4531          JAE0940ME2Z  1.1  Ok

      GC_Server_4510#show ver
      Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(25)EWA6, RELEASE SOFTWARE (fc1)
      Technical Support: http://www.cisco.com/techsupport
      Copyright (c) 1986-2006 by Cisco Systems, Inc.
      Compiled Fri 02-Jun-06 16:27 by ssearch
      Image text-base: 0x10000000, data-base: 0x115FCF1C

      ROM: 12.2(20r)EW1
      Dagobah Revision 226, Swamp Revision 34

      GC_Server_4510 uptime is 4 weeks, 1 day, 15 hours, 7 minutes
      Uptime for this control processor is 4 weeks, 1 day, 15 hours, 9 minutes
      System returned to ROM by power-on
      System restarted at 10:30:40 EST Mon May 3 2010
      System image file is "bootflash:"

      This product contains cryptographic features and is subject to United
      States and local country laws governing import, export, transfer and
      use. Delivery of Cisco cryptographic products does not imply
      third-party authority to import, export, distribute or use encryption.
      Importers, exporters, distributors and users are responsible for
      compliance with U.S. and local country laws. By using this product you
      agree to comply with applicable laws and regulations. If you are unable
      to comply with U.S. and local laws, return this product immediately.

      A summary of U.S. laws governing Cisco cryptographic products may be found at:

      If you require further assistance please contact us by sending email to

      cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory.
      Processor board ID FOX10160364
      MPC8245 CPU at 400Mhz, Supervisor V
      Last reset from PowerUp
      13 Virtual Ethernet interfaces
      80 FastEthernet interfaces
      244 Gigabit Ethernet interfaces
      511K bytes of non-volatile configuration memory.

      Configuration register is 0x2101

      ip route-cache flow infer-fields
      ip flow ingress infer-fields
      ip flow ingress layer2-switched
      ip flow-export source Vlan506
      ip flow-export version 5
      ip flow-export destination 2055


      6/2/2010 9:14 AM Event Type You have not enabled NetFlow data export on device. For more information, see "Enabling NetFlow and NetFlow Data Export (NDE) on Cisco Catalyst Switches" in the Support - Product Documentation area of www.solarwinds.com.
      The event is You have not enabled Netflow data export on  Which is my 4510.  How can I correct this?  The NTA summary page shows current dates and times from the device like the other devices.  It was receiving cbqos data but that date is not changing now.