7 Replies Latest reply on Apr 26, 2010 9:13 AM by lls71

    Activity Report.Version table fails with APC AP9630 UPS Network Management Card 2

    lls71

      Hi!

      The Activity Report.Version table fails with the new APC UPS Network Management Card 2 model AP9630 (AOS 5.x). The error is Failed to determine device prompt anchor point - Most likely reason is timeout. The reason is clear: APC has changed the telnet interface of the management card COMPLETELY. It's not a 1 2 3 4 menu, but now it uses commands. For example:

      User Name : admin
      Password  : *****

      American Power Conversion               Network Management Card AOS      v5.0.3
      (c) Copyright 2009 All Rights Reserved  Smart-UPS & Matrix-UPS APP       v5.0.3
      -------------------------------------------------------------------------------
      Name      : UPS01                                 Date : 02.03.2010
      Contact   : -                                         Time : 11:53:39
      Location  : SOMEWHERE                                     User : Administrator
      Up Time   : 11 Days 2 Hours 39 Minutes                Stat : P+ N+ A+

      apc>system
      E000: Success
      Name:     UPS01
      Contact:  -
      Location: SOMEWHERE
      DateTime: 02.03.2010:11:53:43
      User:     Administrator
      Up Time:  11 Days 2 Hours 39 Minutes
      Stat:     P+ N+ A+
      Bootmon:  bootmon:v1.0.0
      AOS:      aos:v5.0.3
      App:      sumx:v5.0.3

      apc>help

      Network Management Card Commands:
      ---------------------------------------------------------------------------
      ?           about       alarmcount  boot        cd          date
      delete      dir         eventlog    exit        format      ftp
      help        ping        portspeed   prompt      quit        radius
      reboot      resetToDef  system      tcpip       user        web
      xferINI     xferStatus

      Device Commands:
      ---------------------------------------------------------------------------
      ups