1 Reply Latest reply on Apr 30, 2009 9:17 AM by erod2727

    How to create a HSRP UnDP e-mail alert using the advance alert in system manager for Orion NPM 9.1 SP 5

    erod2727

      OK, I created two HSRP custom poller in UnDP and assigned raw values to one of them.

      The two HSRP pollers are:

      cHsrpStateChange (1.3.6.1.4.1.9.9.106.2.0.1) - which means that the HSRP state has changed on this device.  Within this Trap is another OID cHsrpGrpStandbyState.

      cHsrpGrpStandbyState (1.3.6.1.4.1.9.9.106.1.2.1.1.15) - which gives you what state it is in (this is the OID I have mapped the values to.

      I know completely nothing about variables, so this is where I am stuck.  

       

      I am not sure if the below conditions will work properly.

       

      Using advance alert in the trigger condition tab I have the following:

      OID is equal to 1.3.6.1.4.1.9.9.106.2.0.1 - which means the HSRP state has changed

       

      In the reset condition tab I left it at default (Reset when trigger conditions are no longer true)

       

      In the Trigger Actions tab

      I want to use the "Send an e-mail / page" action

      I am not sure how to build the variables to show the mapped values I created for cHsrpGrpStandbyState in the body of the email.

      And I would assume I would do the same thing I did in the Trigger Actions Tab for the Reset Actions Tab.

        • Re: How to create a HSRP UnDP e-mail alert using the advance alert in system manager for Orion NPM 9.1 SP 5
          erod2727

          more information on the trap I am trying to send an e-mail on with mapped values stated in BOLD:

           

          4/30/2009 9:21 AM : CISCO-HSRP-MIB:cHsrpStateChange  SNMP Trap

               Received Time:4/30/2009 9:21:43 AM

               Source: (IP Address)

               Community:  (Community String)

               Variable Bindings

                    sysUpTime:= 159 days 14 hours 40 minutes 46.14 seconds (1379044614)

                    snmpTrapOID:= CISCO-HSRP-MIB:cHsrpStateChange (1.3.6.1.4.1.9.9.106.2.0.1)

                    cHsrpGrpStandbyState.1.17:= 6

                    experimental.1057.1:= (IP Address)

                    snmpTrapEnterprise:= CISCO-HSRP-MIB:cHsrpMIBNotificationPrefix (1.3.6.1.4.1.9.9.106.2)