3 Replies Latest reply on Apr 30, 2008 7:34 PM by Andy McBride

    NTA v3 - Graphs are WAY off

    aLTeReGo

      I just upgraded to NTA v3 and the process went very smoothly. It was such a success that we decided to add another netflow source to NTA. This device is a Cisco 3825 running IOS 12.4(12). In the router I have two Internet interfaces running BGP on the router and an internal interface. I configured the router using the Solarwinds Netflow Configurator from the toolset. What I'm seeing for graph data makes no sense. One of my Internet connections which is a 20meg link is showing 1GB of data. Other charts for this device are equally incorrect.


       Below is a snipit of my configuration


      interface GigabitEthernet0/0
       description Internal Network
       ip address XXX.XXX.XXX.X XXX.XXX.XXX.XXX
       ip flow ingress
       duplex auto
       speed auto
       media-type rj45
       no keepalive


      interface GigabitEthernet0/1/0
       description ISP1 Internet
       ip address XX.XX.XX.XX XXX.XXX.XXX.XXX
       ip flow ingress
       negotiation auto


       interface GigabitEthernet0/0/0
       no ip address
       ip flow ingress
       negotiation auto
      !
      interface GigabitEthernet0/0/0.1
       description ISP2 Internet
       encapsulation dot1Q 203
       ip address XX.XXX.XXX.XXX XXX.XXX.XXX.XXX


      ip flow-export version 5
      ip flow-export destination XXX.XX.X.XX 2055