My Toolset 9.1 Cannot Define CPU Gauge Device Type

This is Excatly what is Giving me: Cannot Determine Device Type

the device company name is Aperto

Please Help

Just to confirm, you are trying to create a CPU Gauge for an Aperto device, correct?   The issue may be that the Aperto WiMAX device does not support the MIB we're using to query CPU load.   Can you post a screen shot of what you're seeing when you add the Aperto device?

Dear clapoint,

Heres the Screenshot of my problem

http://aycu40.webshots.com/image/31319/2003686421469111154_rs.jpg

Please Help in this issue, what to do ??

Waiting for your response and thanks for Help

It is most likely that we do not have the MIBs for this device in our database.  We can verify this if you could look up a value for us by performing the following steps:

1. Open up the MIB Browser and set the IP Address of the device  (in this case  10.2.222.1)
2. Navigate to the sysObjectID node with an OID of 1.3.6.1.2.1.1.2 and select it.
3. Click the "Get Tree" button.  A table will display in the right pane.
4. Under the Value column in the table, right click on the actual value and select "Details ..."
5. Copy and paste in a reply to this post information in the Details windows like the following....

OID  1.3.6.1.2.1.1.2.0
Type  OBJECT-IDENTIFIER
Units  
Access  read-only
Status  unknown
Value  1.3.6.1.4.1.9.1.17
   cisco2501

With that information, we can determine if our MIBs database contains your device.

Thanks,

Very Thankful for Your Help, my best Regards to you and this Forum ! :D

If you provide us with that information from my last post, we can check if your device is in our MIBs database.  If not, we can add it to our database for a future product update.  Please let us know.

 Thanks,