This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.

You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Pollers for Tandberg\Cisco VCS Expressway

jonchill over 13 years ago

We've just installed on of these and before I start digging at the MIB, I wondered if anyone had any useful cistom pollers for the VCS and wouldn't mind sharing them?

Thanks

Jon

Parents

0 michal.hrncirik over 12 years ago

Hi Jon,
do you have a more specific idea what data you would like to collect from those devices (video, overall performance)?
thanks,
Michal
Cancel
Vote Up 0 Vote Down

Cancel
0 jonchill over 12 years ago in reply to michal.hrncirik

Michal
We would like to be able to get information on call in progress, call quality, call issues, TMS conference centre. See below the kind of information that would be useful during and post call.
Thanks

Jon

Call information
State Disconnected
Start time 2012-02-07 08:30:02
Duration 49 minutes 23 seconds
Tag ee181126-5165-11e1-a796-0010f320f5ca
Bandwidth
Requested 1920 kbps
Allocated 1920 kbps
Route TraversalZone -> Zone001ToTraversalSZ -> TraversalSubZone -> DefaultSZtoTraversalSZ -> DefaultSubZone
Incoming call setup parameters
Source alias 1 8000 (H323Id)
Target alias 1 PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol H323
Address 10.151.177.5:2776
Encryption type None
Cause Normal, unspecified
Outgoing call setup parameters
Source alias 1 8000 (H323Id)
Target alias 1 PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol H323
Address 10.170.3.116:1720
Encryption type None
Cause Normal, unspecified
Cancel
Vote Up 0 Vote Down

Cancel

Call information
State	Disconnected
Start time	2012-02-07 08:30:02
Duration	49 minutes 23 seconds
Tag	ee181126-5165-11e1-a796-0010f320f5ca

Bandwidth
Requested	1920 kbps
Allocated	1920 kbps
Route	TraversalZone -> Zone001ToTraversalSZ -> TraversalSubZone -> DefaultSZtoTraversalSZ -> DefaultSubZone

Incoming call setup parameters
Source alias 1	8000 (H323Id)
Target alias 1	PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol	H323
Address	10.151.177.5:2776
Encryption type	None
Cause	Normal, unspecified

Outgoing call setup parameters
Source alias 1	8000 (H323Id)
Target alias 1	PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol	H323
Address	10.170.3.116:1720
Encryption type	None
Cause	Normal, unspecified

Reply

0 jonchill over 12 years ago in reply to michal.hrncirik

Michal
We would like to be able to get information on call in progress, call quality, call issues, TMS conference centre. See below the kind of information that would be useful during and post call.
Thanks

Jon

Call information
State Disconnected
Start time 2012-02-07 08:30:02
Duration 49 minutes 23 seconds
Tag ee181126-5165-11e1-a796-0010f320f5ca
Bandwidth
Requested 1920 kbps
Allocated 1920 kbps
Route TraversalZone -> Zone001ToTraversalSZ -> TraversalSubZone -> DefaultSZtoTraversalSZ -> DefaultSubZone
Incoming call setup parameters
Source alias 1 8000 (H323Id)
Target alias 1 PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol H323
Address 10.151.177.5:2776
Encryption type None
Cause Normal, unspecified
Outgoing call setup parameters
Source alias 1 8000 (H323Id)
Target alias 1 PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol H323
Address 10.170.3.116:1720
Encryption type None
Cause Normal, unspecified
Cancel
Vote Up 0 Vote Down

Cancel

Call information
State	Disconnected
Start time	2012-02-07 08:30:02
Duration	49 minutes 23 seconds
Tag	ee181126-5165-11e1-a796-0010f320f5ca

Bandwidth
Requested	1920 kbps
Allocated	1920 kbps
Route	TraversalZone -> Zone001ToTraversalSZ -> TraversalSubZone -> DefaultSZtoTraversalSZ -> DefaultSubZone

Incoming call setup parameters
Source alias 1	8000 (H323Id)
Target alias 1	PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol	H323
Address	10.151.177.5:2776
Encryption type	None
Cause	Normal, unspecified

Outgoing call setup parameters
Source alias 1	8000 (H323Id)
Target alias 1	PHB-ChiefExec@vc.ulh.nhs.uk (H323Id)
Protocol	H323
Address	10.170.3.116:1720
Encryption type	None
Cause	Normal, unspecified

Children

0 mattjenkins over 12 years ago in reply to jonchill

Hiya,
I believe the SNMP on the VCS's is only for TMS and VCS to talk.
Sorry for the bad news.
Cancel
Vote Up 0 Vote Down

Cancel
0 ian105 over 12 years ago in reply to mattjenkins

Semi-related. Posted an NCM template today to enable NCM to backup configuration of VCS and VCS expressway appliances via SSH. You still need to create backups manually from GUI to enable an easy import/restore process, but this grabs the raw settings via the NCM process, to ensure you have a current settings backup. Hope someone else finds useful.
Cancel
Vote Up 0 Vote Down

Cancel