0 Replies Latest reply on Jul 24, 2018 8:00 PM by wombatactual

    Cisco NCS6008: Configuration failing when entering 'admin' mode

    wombatactual

      Hello, I have an issue trying to develop the device template for Cisco NCS6K. There are two configurations in the router which needs to be backed up. These are IOS-XR and the Admin configuration. I know from the ISE that the commends being entered are:

       

      terminal length 0

      admin

       

      It stops at the 'admin' which appears it does not like the change in prompt. Setting the prompt to # in the advance features does not help. Any ideas?

       

      Device template

      I have tried both these version, I am testing with the 'Admin Startup'

      Version 1

       

       

          <Command Name="Startup" Value="show running formal" />

          <Command Name="Running" Value="show running" />

          <Command Name="EnterAdminMode" Value="admin"/>

          <Command Name="ExitAdminMode" Value="exit"/>

         <Command Name="Admin Startup" Value="${EnterAdminMode}${CRLF}${Running}${CRLF}${ExitAdminMode}${CRLF}" />

          <Command Name="Admin Running" Value="${EnterAdminMode}${CRLF}${Running}${CRLF}${ExitAdminMode}${CRLF}" />

       

      Version 2

          <Command Name="Startup" Value="show running formal" />

          <Command Name="Running" Value="show running" />

          <Command Name="EnterAdminMode" Value="admin"/>

          <Command Name="ExitAdminMode" Value="exit"/>

         <Command Name="Admin Startup" Value="admin${CRLF}show running${CRLF}$exit${CRLF}" />

          <Command Name="Admin Running" Value="${EnterAdminMode}${CRLF}${Running}${CRLF}${ExitAdminMode}${CRLF}" />

       

       

      Log of how to download NCS6K administration configuration

       

       

      ISE Username:xxxxxxxxxx

      Password:

       

       

      RP/0/RP0/CPU0:hkth-core02#terminal length 0

      Wed Jul 25 00:44:45.848 UTC

      RP/0/RP0/CPU0:hkth-core02#admin

      Wed Jul 25 00:44:50.430 UTC

       

      c637614 connected from 127.0.0.1 using console on xr-vm

      sysadmin-vm:0_RP0# show running-config

      Wed Jul  25 00:45:03.135 UTC

      fpd auto-upgrade disable