This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Error upgrading firmware on Cisco 3850

Has anybody seen an error like this before? I ran the "software cleanup" previously on the switch so as to make some room for the new IOS(512MB)

Upgrade Operation Started at 6/19/2018 11:47:58 AM

_______________________________________________________________________________

Upgrading node CiscoSW1

Writing config to NvRAM...

write memory

Building configuration...

Compressed configuration from 10714 bytes to 4627 bytes[OK]

Backup Running config...

Running config backed up successfully

Backup Startup config...

Startup config backed up successfully

Backup Exisitng Firmware Image flash:packages.conf ...

copy flash:packages.conf tftp://172.16.27.73

Address or name of remote host [172.16.27.73]?

Destination filename [packages.conf]?

!!

1236 bytes copied in 0.030 secs (41200 bytes/sec)

ERROR: Downloaded firmware image filename "packages.conf" not found on server

Upgrade Error on node CiscoSW1. Operation interrupted