This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.
You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

Hardware polling failed: Error 31040 - Timeout

Hi Thwacksters,

Hope someone will give clear idea on the below error.

The below points were already verified

1. Node is Up.

2. SNMP is responding.

3. Able to do SNMPWALK for CiscoEnvMonMib from the Poller( Tested both SNMP v1 and v2c).

4. Removed and re-added the device.

5. Restarted the Orion services(on the Poller where node is added).

6. Increased the SNMP timeout on polling setting page, no luck.

pastedImage_0.png

Suggestions would be helpful !

Thanks ahead!