1 Reply Latest reply on Nov 20, 2017 8:59 AM by ryaku

    Firmware Upgrade Fails at Verification

    ryaku

      While upgrading a cisco device using the Firmware Upgrade in NCM the files uploads and begins to verify when the process fails. Below is the following information.

       

      Destination filename [c3560c405ex-universalk9-mz.152-2.E6.bin]?

      Accessing tftp://192.168.8.12/c3560c405ex-universalk9-mz.152-2.E6.bin...

      Loading c3560c405ex-universalk9-mz.152-2.E6.bin from 192.168.8.12 (via Vlan199): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

      [OK - 20617216 bytes]

      20617216 bytes copied in 410.696 secs (50201 bytes/sec)

      dir flash: ${SuccessRegEx:c3560c405ex-universalk9-mz.152-2.E6.bin}

      Directory of flash:/

          2  -rwx        1716  Mar 29 2011 20:28:41 -05:00  vlan.dat

          3  -rwx    20617216  Nov 14 2017 08:47:59 -06:00  c3560c405ex-universalk9-mz.152-2.E6.bin

          4  -rwx        5144  Nov 14 2017 08:45:38 -06:00  multiple-fs

          7  -rwx       11604  Nov 14 2017 08:45:37 -06:00  config.text

          5  -rwx        2292  Nov 14 2017 08:45:38 -06:00  private-config.text

          6  -rwx    21568478  Aug 21 2014 11:16:41 -05:00  c3560c405ex-universalk9-mz.152-1.E3.bin

      57931776 bytes total (15380480 bytes free)

       

       

       

       

      Verifying uploaded image...

       

       

       

       

      ERROR Connection Refused by 10.244.16.31

       

      Any Ideas of why this is happening?

      The connection can obviously establish, and only fails once it gets to the verification stage.

       

      Message was edited by: Andrew Clark