3 Replies Latest reply on Mar 28, 2017 5:31 AM by elkaysar

    Backup Checkpoint Fw


      Hello everybody,


      I would like to save the config of our Checkpoint Fw, so i start by adding the device then i create an a backup running config activity, the activity use export command to save the configuration. i want to use the show configuration command i used the alternate command option and i used the show configuration. the execution of the activity take too match time when i stoped the activity i get the error below :


      Did not receive expected response to command: show configuration.


      Did someone have the same problem ? how to solve it ? how to save yhe checkpoint configuration?



      Many thanks in advance

        • Re: Backup Checkpoint Fw

          Can you enable capture mode (File\Enable capture mode), and post the contents of the debug file (located in your \CatTools3\Debug folder).  Prior to posting, please remove and sensitive data.

            • Re: Backup Checkpoint Fw



              Sorry for the delay du to the time zone difference. her the result of the debug



              <NEWSESSION CatTools 3.11.0 09/03/2017 11:07:05>


              <DEVICE TYPE=Checkpoint.VPN>

              <ACTIVITY TYPE=Device.Backup.Running Config>

              <ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>


              <C OK 11:07:06>

              <R-11:07:06>This system is for authorized use only.[10]Last login: Wed Mar  8 21:30:10 2017 from XXX[13][13][10]




              <W-11:07:07>show configuration

              <R-11:07:07>show configuration


              <R-11:07:07>[13][10]#[13][10]# Configuration of XXX[13][10]# Language version: 12.2v1[13][10]#[13][10]# Exported by kiwi on Thu Mar  9 11:07:04 2017[13][10]#[13][10]set domainname XXX[13][10]

              <R-11:07:07>[13][10][13][10]set message caption off [13][10] [13][10]

              <R-11:07:07>set ipv6-state off[13][10]set net-access telnet off[13][10]add allowed-client host any-host [13][10]set hostname XXX[13][10]

              <R-11:07:07>set snmp mode default[13][10]set snmp agent on[13][10]set snmp agent-version any[13][10]set snmp community netsup read-only [13][10]add snmp interface eth0[13][10]add snmp traps receiver XXX community netsup version v2 [13][10]set snmp traps trap authorizationError disable [13][10]-- More --



              I replace the Sensitive information with XXX.


              Many thanks in advance.

            • Re: Backup Checkpoint Fw

              Hi everyone,


              i solved the problem by using the command clish -s "show configuration" my problem was with the paggination.


              i would like know if there is any possibily to save the firewall rules.


              Many thanks