0 Replies Latest reply on Dec 28, 2016 11:34 AM by mrockerem

    SNMP TRAPS from Same Server.

    mrockerem

      I have a SNMP TRAPS requirement from Database team. I have tried several solutions posted on Thwack but none of them has the same requirement.

       

      Facts

      Source Server: Same for All traps

      Traps: Different

      Trigger:

      Reset: No Reset Condition (Prefer: No reset condition – Trigger this alert each time the trigger condition is met)

       

      Platform: Orion Platform 2016.1.5300, SAM 6.2.4, DPA 10.0.1, NCM 7.5, IVIM 2.1.2, QoE 2.1.0, NetPath 1.0, NPM 12.0, NTA 4.2.0, UDT 3.2.4

       

      Requirement:

      Trigger Condition: Every time the trap comes in Alarm should be triggered.

      Reset : No reset condition should be there. Engineer will manually reset the Alert after the NOC notifies them.

       

      My Goal:

      Create New Alert based on Varbinds and Alert should trigger every time a trap comes in.

       

      Message # 1

      ibmSoNASNotificationMessage =

       

      Message # 2

      tsveERRI =

       

      Current Setup:

      Trap Collector/Forwarder : sc0240v

      Color is different just because I just created basic alerts for the following

       

      and

      We can disregard the above and create a new condition from scratch.

       

       

      12/23/2016 11:38:06 PM20x.x.xx.xxx sc0240v Mizuhocbus ATM-SWITCHING-NODE-MIB:ibmProd.0.1 ibmSoNASNotificationMessage = SF1218W The file system usage of /dev/NASFS04 reached the warning level of 80%
      ibmSoNASNotificationTime = 23.12.2016 23:38:06.455
      ibmSoNASNotificationLogLevel = WARNING
      ibmSoNASNotificationProcess = 0
      ibmSoNASNotificationFacility = USER(1)
      ibmSoNASNotificationComponent = UTILIZATION
      ibmSoNASNotificationHost = mgmt001st001
      ibmSoNASNotificationCluster = 12249236846866375040
      snmpTrapOID = ATM-SWITCHING-NODE-MIB:ibmProd.0.1
      sysUpTime = 0.00 second
      12/23/2016 8:08:06 PM20x.x.xx.xxxsc0240v Mizuhocbus ATM-SWITCHING-NODE-MIB:ibmProd.0.1 ibmSoNASNotificationMessage = SF1218W The file system usage of /dev/NASFS04 reached the warning level of 80.02%
      ibmSoNASNotificationTime = 23.12.2016 20:08:06.148
      ibmSoNASNotificationLogLevel = WARNING
      ibmSoNASNotificationProcess = 0
      ibmSoNASNotificationFacility = USER(1)
      ibmSoNASNotificationComponent = UTILIZATION
      ibmSoNASNotificationHost = mgmt001st001
      ibmSoNASNotificationCluster = 12249236846866266406
      snmpTrapOID = ATM-SWITCHING-NODE-MIB:ibmProd.0.1
      sysUpTime = 0.00 second
      12/23/2016 3:13:34 PM20x.x.xxx..xxx sc0240v Mizuhocbus IBM-SVC-MIB:tsveETrap tsveADD2 = # Additional Data (64 -> 127) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
      tsveADD1 = # Additional Data (0 -> 63) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
      tsveMPNO = # Machine Part Number =
      tsveCOPY = # Copy ID =
      tsveOBJN = # Object Name =
      tsveOBJI = # Object ID = 230
      tsveOBJT = # Object Type = drive
      tsveTIME = # Timestamp = Sun Dec 18 17:16:48 2016
      tsveERRS = # Error Sequence Number = 1787
      tsveNODE = # Node ID = 4
      tsveCLUS = # System Name = IHCV7K01
      tsveFRUP = # FRU = Hard Disk Drive: Vendor Id: IBM-D050 Product Id: HUC156030CSS20 Part Number 00AR324
      tsveSWVE = # System Version = 7.5.0.6 (build 115.52.1512221701000)
      tsveERRC = # Error Code = 1285 : Drive SAS error counts exceeded warning thresholds
      tsveERRI = # Error ID = 10084 : Drive SAS error counts exceeded warning thresholds
      tsveSERI = # Serial Number = xxx
      tsveMACH = # Machine Type = 207624F
      snmpTrapOID = IBM-SVC-MIB:tsveETrap
      sysUpTime = 0.00 second
      12/22/2016 8:28:00 PM203.3.10.xxxsc0240v Mizuhocbus IBM-SVC-MIB:tsveWTrap tsveADD2 = # Additional Data (64 -> 127) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
      tsveADD1 = # Additional Data (0 -> 63) = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
      tsveMPNO = # Machine Part Number =
      tsveCOPY = # Copy ID =
      tsveOBJN = # Object Name = node4
      tsveOBJI = # Object ID = 4
      tsveOBJT = # Object Type = node
      tsveTIME = # Timestamp = Thu Dec 22 20:41:53 2016
      tsveERRS = # Error Sequence Number = 1812
      tsveNODE = # Node ID = 1
      tsveCLUS = # System Name = IHCV7K01
      tsveFRUP = # FRU = None
      tsveSWVE = # System Version = 7.5.0.6 (build 115.52.1512221701000)
      tsveERRC = # Error Code =
      tsveERRI = # Error ID = 980440 : Failed to transfer file from remote node
      tsveSERI = # Serial Number = xxx
      tsveMACH = # Machine Type = 2076524
      snmpTrapOID = IBM-SVC-MIB:tsveWTrap
      sysUpTime = 0.00 second

       

      I hope someone can help me with this request.