This discussion has been locked. The information referenced herein may be inaccurate due to age, software updates, or external references.

You can no longer post new replies to this discussion. If you have a similar question you can start a new discussion in this forum.

No netflow data from Palo Alto PA-5020

rlawsha over 11 years ago

I pulled out a cisco ASA-5510 which was giving me netflow data and replaced it with a Palo Alto Networks PA-5020. Same IP's connected to the same switches. I have configured the 5020 to export netflow data but the solar winds server never sees it. Not sure where the problem is at this point. I haven't checked the links with wireshark yet so I don't know for a fact that the 5020 is putting out data. Anyone else have any luck with getting netflow data from this device? I am running version 4.1.6 on the 5020.

Top Replies

michal.hrncirik over 9 years ago in reply to epenney +1

Hi, this is know issue, upgrade your firmware: SolarWinds Knowledge Base :: Orion NTA Displays No NetFlow Data from Palo Alto PA-5020 on PANOS 4.1.6

0 rlawsha over 11 years ago

I have confirmed with wireshark that netflow data on port 2055 is indeed getting to my netflow server but no data is displayed. The interface shows traffic in Solar Winds but no netflow data is ever shown. Service is running fine not sure what to do next.
Cancel
Vote Up 0 Vote Down

Cancel
0 epenney over 9 years ago in reply to rlawsha

did you ever get this working? we are having same issue.
Cancel
Vote Up 0 Vote Down

Cancel
0 michal.hrncirik over 9 years ago in reply to epenney

Hi, this is know issue, upgrade your firmware: SolarWinds Knowledge Base :: Orion NTA Displays No NetFlow Data from Palo Alto PA-5020 on PANOS 4.1.6
Cancel
Vote Up +1 Vote Down

Cancel
0 seang over 8 years ago

We are having a similar experience with our Palo Alto 3050. We moved away from the Cisco ASAs as well. I would hate to think that we have to move away from the Solarwinds product line, because of the lack of support for newer Technology. Currently there is no support from FSM either for Palo Alto and now NTA.
Cancel
Vote Up 0 Vote Down

Cancel
0 superfly over 8 years ago in reply to seang

I found the same thing so I also monitor the uplinks between the Palo Alto and my 6509 switch. On this link I can see the netflow data.
Will just keep using that until I can see it on my actual internet link out of the Palo Alto.
Cancel
Vote Up 0 Vote Down

Cancel