There was a similar post but no configs were posted.
I am collecting netflow data from 6500's and 3845's. The 3845's are sending netflow from inbound and outbound on the interfaces.
The 6500's are inbound only. The configuration is much the same so it must be something deeper than that.
Here is the 6500 config that is the same on the 3845's
interface Vlan32
description VOICE
bandwidth 1000000
ip address 10.20.32.3 255.255.248.0
ip access-group VOICE_32_ACL_IN in
ip helper-address x.20.120.101
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip flow egress
standby 32 ip x.20.32.1
standby 32 timers msec 300 1
standby 32 priority 255
standby 32 preempt
standby 32 authentication md5 key-string
no mop enabled
mls ip slb purge global
mls netflow interface
no mls flow ip
no mls flow ipv6
no mls qos rewrite ip dscp
mls qos marking ignore port-trust
mls qos
no mls rate-limit unicast acl vacl-log
mls cef error action reset
mls netflow interface
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.120.120 9996
Does anyone have any ideas why this is please?
Sam